Multistep adsorption of anionic dyes on silica/chitosan hybrid. 1. Comparative kinetic data from liquid- and solid-phase models.

In this work, a hybrid silica/chitosan was synthesized and characterized by nitrogen elemental analysis and thermal analysis (TG, DTG, DTA, and DSC) and BET surface area. The hybrid was used in adsorption studies of two anionic dyes from aqueous solutions. A rise of temperature accelerates mass transfer of dyes into the hybrid. However, the maximum adsorption capacities reach similar values from 25 to 55 degrees C. The kinetic data were first evaluated in relation to the decrease of the time-related residual concentration of the dyes in solution, where the second-order model has presented the best fitting. The solid-phase interaction of dye data presents a rough fitting to the traditional first-order Lagergren kinetic model. However, a modified Avrami kinetic equation was successfully fitted to the kinetic quantities, where from five to seven kinetic regions were found. A pore-diffusion model has also demonstrated that the diffusion is the rate-controlling interaction mechanism. However, the experimental-calculated comparative values are the best way to evaluate a specific aqueous- or solid-phase kinetic model.