Literature DB >> 1602762

A finite element analysis of the indentation stress-relaxation response of linear biphasic articular cartilage.

R L Spilker1, J K Suh, V C Mow.   

Abstract

The indentation problem of a thin layer of hydrated soft tissue such as cartilage or meniscus by a circular plane-ended indenter is investigated. The tissue is represented by a biphasic continuum model consisting of a solid phase (collagen and proteoglycan) and a fluid phase (interstitial water). A finite element formulation of the linear biphasic continuum equations is used to solve an axisymmetric approximation of the indentation problem. We consider stress-relaxation problems for which analytic solution is intractable; where the indenter is impermeable (solid) and/or when the interface between the indenter and tissue is perfectly adhesive. Thicknesses corresponding to a thin and thick specimen are considered to examine the effects of tissue thickness. The different flow, pressure, stress and strain fields which are predicted within the tissue, over time periods typically used in the mechanical testing of soft tissues, will be presented. Results are compared with the case of a porous free-draining indenter with a perfectly lubricated tissue-indenter interface, for which an analytic solution is available, to show the effects of friction at the tissue-indenter interface, and the effects of an impermeable indenter. While these effects are present for both thin and thick tissues, they are shown to be more significant for the thin tissue. We also examine the effects of the stiffness of the subchondral bone on the response of the soft tissue and demonstrate that the subchondral bone substrate can be modeled as a rigid, impermeable boundary. The effects of a curved tissue-subchondral bone interface, and the early time response are also studied. For physiologically reasonable levels of curvature, we will show that the curved tissue-subchrondal bone interface has negligible influence on the tissue response away from the interface. In addition, the short-time stress-relaxation responses of the tissue (e.g., at times less than 1s) demonstrate the essential role of the fluid phase in supporting the load applied to the tissue, and by extrapolation to shorter times characteristics of normal joint motion, suggest the essential role of a biphasic model in representing soft tissue behavior in joint response.

Entities:  

Mesh:

Year:  1992        PMID: 1602762     DOI: 10.1115/1.2891371

Source DB:  PubMed          Journal:  J Biomech Eng        ISSN: 0148-0731            Impact factor:   2.097


  18 in total

1.  Biphasic finite element modeling of hydrated soft tissue contact using an augmented Lagrangian method.

Authors:  Hongqiang Guo; Robert L Spilker
Journal:  J Biomech Eng       Date:  2011-11       Impact factor: 2.097

2.  Contrast-enhanced CT using a cationic contrast agent enables non-destructive assessment of the biochemical and biomechanical properties of mouse tibial plateau cartilage.

Authors:  Benjamin A Lakin; Harsh Patel; Conor Holland; Jonathan D Freedman; Joshua S Shelofsky; Brian D Snyder; Kathryn S Stok; Mark W Grinstaff
Journal:  J Orthop Res       Date:  2016-01-06       Impact factor: 3.494

3.  Fluid load support during localized indentation of cartilage with a spherical probe.

Authors:  E D Bonnevie; V J Baro; L Wang; D L Burris
Journal:  J Biomech       Date:  2012-01-28       Impact factor: 2.712

4.  Estimation of Young's modulus and Poisson's ratio of soft tissue from indentation using two different-sized indentors: finite element analysis of the finite deformation effect.

Authors:  A P C Choi; Y P Zheng
Journal:  Med Biol Eng Comput       Date:  2005-03       Impact factor: 2.602

5.  A theoretical analysis of water transport through chondrocytes.

Authors:  G A Ateshian; K D Costa; C T Hung
Journal:  Biomech Model Mechanobiol       Date:  2006-05-17

6.  Multiphasic finite element framework for modeling hydrated mixtures with multiple neutral and charged solutes.

Authors:  Gerard A Ateshian; Steve Maas; Jeffrey A Weiss
Journal:  J Biomech Eng       Date:  2013-11       Impact factor: 2.097

7.  Biphasic Finite Element Modeling Reconciles Mechanical Properties of Tissue-Engineered Cartilage Constructs Across Testing Platforms.

Authors:  Gregory R Meloni; Matthew B Fisher; Brendan D Stoeckl; George R Dodge; Robert L Mauck
Journal:  Tissue Eng Part A       Date:  2017-04-14       Impact factor: 3.845

8.  Quantitative MRI of Human Cartilage In Vivo: Relationships with Arthroscopic Indentation Stiffness and Defect Severity.

Authors:  Tuomas Svärd; Martti Lakovaara; Harri Pakarinen; Marianne Haapea; Ilkka Kiviranta; Eveliina Lammentausta; Jukka Jurvelin; Osmo Tervonen; Risto Ojala; Miika Nieminen
Journal:  Cartilage       Date:  2016-12-28       Impact factor: 4.634

9.  A one-dimensional mixed porohyperelastic transport swelling finite element model with growth.

Authors:  J L Harper; B R Simon; J P Vande Geest
Journal:  J Mech Behav Biomed Mater       Date:  2013-05-07

10.  Multimodal evaluation of tissue-engineered cartilage.

Authors:  Joseph M Mansour; Jean F Welter
Journal:  J Med Biol Eng       Date:  2013-02-01       Impact factor: 1.553

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.