Literature DB >> 16020034

Dosimetric comparisons of particle deposition and retention in rats and humans.

James S Brown1, William E Wilson, Lester D Grant.   

Abstract

Much of the information on the toxicity of particulate matter (PM) comes from studies in which laboratory rats were exposed to PM by inhalation or instillation. Optimal use of these toxicologic data requires extrapolation to the human scenario. Assuming that comparable doses should cause comparable effects across species and that species respond similarly to a given dose at a target site, extrapolations only require that dose be defined and then characterized. Dose may be defined in terms of a PM indicator (e.g., particle number or mass), a respiratory region, and the time over which the dose is integrated (i.e., deposited versus retained dose and incremental versus accumulated dose). Dose must also be normalized: for example, unit of dose per body mass, respiratory region surface area, or number of alveolar macrophages. The parameters chosen to define a normalized dose can drastically affect the rat exposure concentration required to provide a normalized dose equivalent to that occurring in a human. The publicly available multiple path particle dosimetry model developed by CIIT Centers for Health Research was used to predict particle deposition and retention in rats and humans. Estimates of particle concentration and exposure duration required for a rat to receive the same dose as received by a human were obtained with consideration of daily activity levels and ambient PM size distributions. These techniques were also used to compare dose and response between rats and humans in several published studies. Results indicate that the relationship between PM dose and response may differ between rats and humans. For acute PM exposures, rats may be less susceptible to inflammatory responses than humans. For chronic exposures to high levels of PM, however, an overload of alveolar clearance in rats may cause them to become more susceptible than humans to adverse pulmonary effects. The dosimetric calculations indicate that to achieve nominally similar acute doses per surface area in rats, relative to humans undergoing moderate to high exertion, PM exposure concentrations for rats would need to be somewhat higher than for humans. Since the clearance of PM is faster from the lung of rats than humans, much higher exposure concentrations are required for the rat to simulate retained burdens. In other cases, rats will require lower exposures than humans to have comparable doses, illustrating the complexity of such analyses. To make accurate estimates of dose, it is essential to have accurate and complete information regarding exposure conditions-that is, not only concentration and duration of exposure, but also the aerosol size distribution. Establishing a firm linkage between exposure and dose requires that consideration be given to particle characteristics, definitions of dose metrics, and biological normalizing factors.

Entities:  

Mesh:

Substances:

Year:  2005        PMID: 16020034     DOI: 10.1080/08958370590929475

Source DB:  PubMed          Journal:  Inhal Toxicol        ISSN: 0895-8378            Impact factor:   2.724


  28 in total

1.  Micron-sized intrapulmonary particle deposition in the developing rat lung.

Authors:  Holger Schulz; Gunter Eder; Ines Bolle; Akira Tsuda; Stefan Karrasch
Journal:  J Appl Physiol (1985)       Date:  2011-12-08

2.  Derivation of occupational exposure limits for multi-walled carbon nanotubes and graphene using subchronic inhalation toxicity data and a multi-path particle dosimetry model.

Authors:  Young-Sub Lee; Jae-Hyuck Sung; Kyung-Seuk Song; Jin-Kwon Kim; Byung-Sun Choi; Il-Je Yu; Jung-Duck Park
Journal:  Toxicol Res (Camb)       Date:  2019-05-28       Impact factor: 3.524

3.  CD36 mediates endothelial dysfunction downstream of circulating factors induced by O3 exposure.

Authors:  Sarah Robertson; Elizabeth S Colombo; Selita N Lucas; Pamela R Hall; Maria Febbraio; Michael L Paffett; Matthew J Campen
Journal:  Toxicol Sci       Date:  2013-05-06       Impact factor: 4.849

Review 4.  The impact of nanomaterial characteristics on inhalation toxicity.

Authors:  Frank S Bierkandt; Lars Leibrock; Sandra Wagener; Peter Laux; Andreas Luch
Journal:  Toxicol Res (Camb)       Date:  2018-02-01       Impact factor: 3.524

5.  Multi-walled carbon nanotubes: sampling criteria and aerosol characterization.

Authors:  Bean T Chen; Diane Schwegler-Berry; Walter McKinney; Samuel Stone; Jared L Cumpston; Sherri Friend; Dale W Porter; Vincent Castranova; David G Frazer
Journal:  Inhal Toxicol       Date:  2012-10       Impact factor: 2.724

6.  In vitro and in vivo assessment of pulmonary risk associated with exposure to combustion generated fine particles.

Authors:  Baher Fahmy; Liren Ding; Dahui You; Slawo Lomnicki; Barry Dellinger; Stephania A Cormier
Journal:  Environ Toxicol Pharmacol       Date:  2010-03       Impact factor: 4.860

7.  Numerical Comparison of Nasal Aerosol Administration Systems for Efficient Nose-to-Brain Drug Delivery.

Authors:  Jingliang Dong; Yidan Shang; Kiao Inthavong; Hak-Kim Chan; Jiyuan Tu
Journal:  Pharm Res       Date:  2017-12-29       Impact factor: 4.200

8.  Ultrafine Particulate Matter Combined With Ozone Exacerbates Lung Injury in Mature Adult Rats With Cardiovascular Disease.

Authors:  Emily M Wong; William F Walby; Dennis W Wilson; Fern Tablin; Edward S Schelegle
Journal:  Toxicol Sci       Date:  2018-05-01       Impact factor: 4.849

9.  Effect of different oral doses of isoniazid-rifampicin in rats.

Authors:  Satya V Rana; Ravinder Pal; Kim Vaiphie; Kartar Singh
Journal:  Mol Cell Biochem       Date:  2006-04-01       Impact factor: 3.396

10.  Increase in relative deposition of fine particles in the rat lung periphery in the absence of gravity.

Authors:  Chantal Darquenne; Maria G Borja; Jessica M Oakes; Ellen C Breen; I Mark Olfert; Miriam Scadeng; G Kim Prisk
Journal:  J Appl Physiol (1985)       Date:  2014-08-28
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.