Literature DB >> 15949542

The anti-oxidative properties of alpha-tocopherol in gamma-irradiated UHMWPE with respect to fatigue and oxidation resistance.

Nobuyuki Shibata1, Naohide Tomita.   

Abstract

Although addition of an antioxidant (alpha-tocopherol) is reported to prevent delamination in ultrahigh molecular weight polyethylene (UHMWPE) knee components, contribution of alpha-tocopherol as an antioxidant to the improvement of long-term fatigue performance of UHMWPE is an unknown mechanism. To solve this problem, bi-directional sliding fatigue tests were performed for gamma-irradiated (25 kGy), gamma-irradiated (25 kGy) with 0.3 wt% alpha-tocopherol added, and gamma-irradiated (25 kGy) with 0.3 wt% tocopheryl acetate added UHMWPE specimens. Internal defect initiation was quantified with scanning acoustic tomography (SAT). Also, oxidation index and crystallinity were obtained from infrared absorption spectra measured using Fourier transform infrared (FT-IR) microscopy. Only gamma-irradiated UHMWPE specimens resulted in severe fatigue fractures. alpha-Tocopherol-added UHMWPE specimens showed significantly lower projected area ratio of defects (1.80+/-0.82) than did gamma-irradiated (7.0+/-2.29) and tocopheryl acetate-added ones (8.50+/-2.01). The oxidation index of gamma-irradiated UHMWPE specimens (0.111+/-0.0052) was extremely higher compared to those of doped ones; 0.0179+/-0.0026 and 0.0144+/-0.0069 for alpha-tocopherol-added and tocopheryl acetate-added ones, respectively. The crystallinity of gamma-irradiated UHMWPE specimens (57.5+/-1.16) was lower compared to those of doped ones; 60.3+/-0.72 and 60.4+/-1.38 for alpha-tocopherol-added and tocopheryl acetate-added ones, respectively. The incorporation of alpha-tocopherol significantly improves the long-term fatigue performance of gamma-irradiated UHMWPE with oxidation stability. Also, the addition of alpha-tocopherol controls macromolecular structures resulting in the improvement of fatigue performance of UHMWPE.

Entities:  

Mesh:

Substances:

Year:  2005        PMID: 15949542     DOI: 10.1016/j.biomaterials.2005.02.035

Source DB:  PubMed          Journal:  Biomaterials        ISSN: 0142-9612            Impact factor:   12.479


  7 in total

1.  Multidirectional wear and impact-to-wear tests of phospholipid-polymer-grafted and vitamin E-blended crosslinked polyethylene: a pilot study.

Authors:  Masayuki Kyomoto; Toru Moro; Yoshio Takatori; Sakae Tanaka; Kazuhiko Ishihara
Journal:  Clin Orthop Relat Res       Date:  2015-03       Impact factor: 4.176

Review 2.  Vitamin E-stabilized UHMWPE for total joint implants: a review.

Authors:  Pierangiola Bracco; Ebru Oral
Journal:  Clin Orthop Relat Res       Date:  2011-08       Impact factor: 4.176

3.  Europium stearate additives delay oxidation of UHMWPE for orthopaedic applications: a pilot study.

Authors:  Luis A Gallardo; Ilenia Carpentieri; Michel P Laurent; Luigi Costa; Markus A Wimmer
Journal:  Clin Orthop Relat Res       Date:  2011-08       Impact factor: 4.176

Review 4.  Effectiveness of Vitamin-E-Doped Polyethylene in Joint Replacement: A Literature Review.

Authors:  Antonio Gigante; Carlo Bottegoni; Vincenza Ragone; Lorenzo Banci
Journal:  J Funct Biomater       Date:  2015-09-08

5.  Analysis of wear, wear particles, and reduced inflammatory potential of vitamin E ultrahigh-molecular-weight polyethylene for use in total joint replacement.

Authors:  C L Bladen; S Teramura; S L Russell; K Fujiwara; J Fisher; E Ingham; N Tomita; J L Tipper
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2013-02-22       Impact factor: 3.368

6.  UHMWPE for arthroplasty: past or future?

Authors:  Elena Maria Brach Del Prever; Alessandro Bistolfi; Pierangiola Bracco; Luigi Costa
Journal:  J Orthop Traumatol       Date:  2008-12-24

7.  In vitro analysis of the cytotoxic and anti-inflammatory effects of antioxidant compounds used as additives in ultra high-molecular weight polyethylene in total joint replacement components.

Authors:  C L Bladen; L Tzu-Yin; J Fisher; J L Tipper
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2012-08-22       Impact factor: 3.368

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.