| Literature DB >> 15909348 |
Abstract
Appropriate addition of CuO/V2O5 and the reduction of the granularity of the raw materials particle decrease the sintering temperature of NiZn ferrite from 1200 degrees C to 930 degrees C. Furthermore, the magnetic properties of the NiZn ferrite prepared at low temperature of 930 degrees C is superior to that of the NiZn ferrite prepared by sintering at high temperature of 1200 degrees C because the microstructure of the NiZn ferrite sintered at 930 degrees C is more uniform and compact than that of the NiZn ferrite sintered at 1200 degrees C. The high permeability of 1700 and relative loss coefficient tandelta/mu(i) of 9.0x10(-6) at 100 kHz was achieved in the (Ni0.17Zn0.63Cu0.20)Fe1.915O4 ferrite.Mesh：
Substances：
Year: 2005 PMID： 15909348 PMCID： PMC1389894 DOI： 10.1631/jzus.2005.B0580
Source DB: PubMed Journal: J Zhejiang Univ Sci B ISSN： 1673-1581 Impact factor: 3.066