Contaminants in drinking water and its mitigation using suitable adsorbents: an overview.

Various options are applicable for the removal of water pollutants included reverse osmosis, ion exchange, coagulation, co-precipitation, catalytic reduction, herbal filtration, electrodialysis and adsorption. This paper deals with the sorption phenomena for the removal of pollutants from drinking water. Attempts have been made to use low cost sorbents developed by pretreatment/activation/impregnation with alkalis, acids, iron oxide, manganese dioxide, ferric chloride, alum, lime, aluminum salts with natural products/indigenous minerals viz. activated alumina, activated carbon, groundnut husk, saw dust, chemically coated sand, fly ash, zeolites, clay minerals and other plant products. Application of Freundich and Langmuir isotherms were used to assess the adsorption capacity. Equilibrium isotherms were determined at optimum temperature and pH to characterize the sorption process. Statistical parameters such as mass transfer coefficients, multiple regression analysis were applied to establish the mechanism. It is suggested that the characterization of suitable, and exhausted sorbent through the application of fourier transformed infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray fluorescence (XRF) is essential to establish its surface bonding. Scope for safety evaluation and risk assessment to human and biosphere may provide the guideline and predication to the regulatory agencies for its sustainable use and safe disposal The ecotoxicological assessment of the leachates and low cost removal technology are discussed in this paper.