Literature DB >> 15803487

Quantitative evaluation of the fibrin clot extension on different implant surfaces: an in vitro study.

Donato Di Iorio1, Tonino Traini, Marco Degidi, Sergio Caputi, Joerg Neugebauer, Adriano Piattelli.   

Abstract

The aim of the present study was a quantitative evaluation of the in vitro fibrin clot extension on different implant surfaces. Forty-five disk-shaped commercially pure Grade 2 titanium samples with three different surface topographies (machined, DPS, and Plus) were used in the present study. For the quantitative evaluation of the fibrin clot, 30 specimens were used (10 per group); human whole blood was employed. Venous blood was drawn from three healthy adult volunteers, and 0.2 mL were immediately dropped onto the surface of each specimen. Contact time was 5 min at room temperature; then the samples were rinsed with saline solution and fixed in a buffered solution of glutaraldehyde and paraformaldehyde. Samples were washed again with buffer and dehydrated in an ascending alcohol series. Specimens belonging to all groups were observed under SEM at a magnification of 1000x. From each sample, 50 random micrographs were collected in .tif format with an N x M 1024 x 768 grid of pixels. Quantitative analysis of fibrin clot extension showed the following results: in machined samples fibrin clot extension was 345987.2 +/- 63747.7 pixels(2) (mean +/- SD), in DPS samples fibrin clot extension was 375930.9 +/- 54726.86 pixels(2) (mean +/- SD), and in Plus samples, fibrin clot extension was 612333.6 +/- 46268.42 pixels(2) (mean +/- SD). With ANOVA it was possible to find that there were significant differences among the groups. The Tukey test revealed that the extension of the fibrin clot of Plus samples was statistically higher compared to both machined and DPS samples. The results of this in vitro study indicate that there is a correlation between implant surface morphology and fibrin clot extension. Improvement in surface microtexture complexity seems to determine the formation of a more extensive and three dimensionally complex fibrin scaffold. Further investigations are necessary to explain in more detail the mechanisms that regulate the fibrin clot formation on different implant surfaces. Copyright 2005 Wiley Periodicals, Inc.

Entities:  

Mesh:

Substances:

Year:  2005        PMID: 15803487     DOI: 10.1002/jbm.b.30251

Source DB:  PubMed          Journal:  J Biomed Mater Res B Appl Biomater        ISSN: 1552-4973            Impact factor:   3.368


  15 in total

1.  Integrin and chemokine receptor gene expression in implant-adherent cells during early osseointegration.

Authors:  Omar Omar; Maria Lennerås; Sara Svensson; Felicia Suska; Lena Emanuelsson; Jan Hall; Ulf Nannmark; Peter Thomsen
Journal:  J Mater Sci Mater Med       Date:  2009-10-25       Impact factor: 3.896

2.  Prospective clinical evaluation of 201 direct laser metal forming implants: results from a 1-year multicenter study.

Authors:  Carlo Mangano; Francesco Mangano; Jamil Awad Shibli; Giuseppe Luongo; Michele De Franco; Francesco Briguglio; Michele Figliuzzi; Tammaro Eccellente; Carmine Rapani; Michele Piombino; Aldo Macchi
Journal:  Lasers Med Sci       Date:  2011-04-26       Impact factor: 3.161

3.  Regulation of osteoclasts by osteoblast lineage cells depends on titanium implant surface properties.

Authors:  Ethan M Lotz; Michael B Berger; Zvi Schwartz; Barbara D Boyan
Journal:  Acta Biomater       Date:  2017-12-30       Impact factor: 8.947

4.  Scanning electron microscopy (SEM) and X-ray dispersive spectrometry evaluation of direct laser metal sintering surface and human bone interface: a case series.

Authors:  Carlo Mangano; Adriano Piattelli; Mario Raspanti; Francesco Mangano; Alessandra Cassoni; Giovanna Iezzi; Jamil Awad Shibli
Journal:  Lasers Med Sci       Date:  2010-08-28       Impact factor: 3.161

5.  Effect of titanium surface topographies on human bone marrow stem cells differentiation in vitro.

Authors:  Vittoria Perrotti; Annalisa Palmieri; Agnese Pellati; Marco Degidi; Laura Ricci; Adriano Piattelli; Francesco Carinci
Journal:  Odontology       Date:  2012-06-08       Impact factor: 2.634

6.  Ultraviolet photofunctionalization of nanostructured titanium surfaces enhances thrombogenicity and platelet response.

Authors:  Nagat Areid; Ilkka Kangasniemi; Eva Söderling; Timo O Närhi
Journal:  J Mater Sci Mater Med       Date:  2018-05-04       Impact factor: 3.896

Review 7.  Implant osseointegration and the role of microroughness and nanostructures: lessons for spine implants.

Authors:  Rolando A Gittens; Rene Olivares-Navarrete; Zvi Schwartz; Barbara D Boyan
Journal:  Acta Biomater       Date:  2014-04-08       Impact factor: 8.947

8.  Blood vessels are concentrated within the implant surface concavities: a histologic study in rabbit tibia.

Authors:  Antonio Scarano; Vittoria Perrotti; Luciano Artese; Marco Degidi; Davide Degidi; Adriano Piattelli; Giovanna Iezzi
Journal:  Odontology       Date:  2013-06-20       Impact factor: 2.634

9.  Benchtop plasma treatment of titanium surfaces enhances cell response.

Authors:  Michael B Berger; Kyla B Bosh; D Joshua Cohen; Barbara D Boyan; Zvi Schwartz
Journal:  Dent Mater       Date:  2021-02-13       Impact factor: 5.304

10.  Growth factors produced by bone marrow stromal cells on nanoroughened titanium-aluminum-vanadium surfaces program distal MSCs into osteoblasts via BMP2 signaling.

Authors:  Michael B Berger; Kyla B Bosh; Thomas W Jacobs; D Joshua Cohen; Zvi Schwartz; Barbara D Boyan
Journal:  J Orthop Res       Date:  2020-10-12       Impact factor: 3.494

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.