Utilizing different ratios of alfalfa and layer ration for molt induction and performance in commercial laying hens.

Molting is a common practice used by the commercial egg industry to rejuvenate flocks for a second or third laying cycle. During this time the hens rest from production, and the reproductive organs are rejuvenated to increase production and quality during the next laying cycle. Although feed withdrawal (FW) is the most popular and effective method of molt induction, it has come under scrutiny due to food safety issues and animal welfare issues. This study involved feeding alfalfa mixed with layer ration at different ratios to hens to determine their ability to induce molt. The treatment ratios were 100% alfalfa (A100), 90% alfalfa and 10% layer ration (A90), and 70% alfalfa and 30% layer ration (A70). In addition, a fully fed (FF) nonmolted control and a FW negative control were used. Alfalfa is an insoluble, high fiber feedstuff with low metabolizable energy. Egg production for A90 and FW treatments ceased completely by d 6, whereas birds fed A100 and A70 ceased egg production by d 8. Ovary and oviduct weight of hens fed all molting diets decreased (P < 0.05) by an average of 1.5 to 2.5% (BW basis) compared with FF control during the 9-d molt induction period. As the percentage of layer ration increased, feed intake also increased and percentage of BW loss decreased during the 9-d molt induction period. Hens molted by FW lost an average of 25.8% BW, whereas A70 hens lost 18.9% BW. Nonmolted hens (FF) and A70 treatment hens had significantly lower (P < 0.05) egg production when compared with all other treatments over the 39-wk postmolt period. FF treatment hens also had lower (P < 0.05) albumen heights when compared with all other treatments. From these results, alfalfa or alfalfa mixed with layer ration appears to be viable alternatives to conventional FW methods for the successful induction of molt and retention of postmolt performance.