Literature DB >> 15778817

Permeability and reactivity of Thermotoga maritima in latex bimodal blend coatings at 80 degrees C: a model high temperature biocatalytic coating.

Olav K Lyngberg1, Chris Solheid, Salim Charaniya, Yue Ma, Venkata Thiagarajan, L E Scriven, Michael C Flickinger.   

Abstract

Thermostable polymers cast as thin, porous coatings or membranes may be useful for concentrating and stabilizing hyperthermophilic microorganisms as biocatalysts. Hydrogel matrices can be unstable above 65 degrees C. Therefore a 55-microm thick, two layer (cell coat + polymer top coat) bimodal, adhesive latex coating of partially coalesced polystyrene particles was investigated at 80 degrees C using Thermotoga maritima as a model hyperthermophile. Coating permeability (pore structure) was critical for maintaining T. maritima viability. The permeability of bimodal coatings generated from 0.8 v/v of a suspension of non-film-forming 800 nm polystyrene particles with high glass transition temperature (T(g) = 94 degrees C, 26.9% total solids) blended with 0.2 v/v of a suspension of film-forming 158 nm polyacrylate/styrene particles (T(g) approximately -5 degrees C, 40.9% total solids) with 0.3 g sucrose/g latex was measured in a KNO3 diffusion cell. Diffusivity ratio remained above 0.04 (D(eff)/D) when incubated at 80 degrees C in artificial seawater (ASW) for 5 days. KNO3 permeability was corroborated by cryogenic-SEM images of the pore structure. In contrast, the permeability of a mono-dispersed acrylate/vinyl acetate latex Rovace SF091 (T(g) approximately 10 degrees C) rapidly decreased and became impermeable after 2 days incubation in ASW at 80 degrees C. Thermotoga maritima were entrapped in these coatings at a cell density of 49 g cell wet weight/liter of coating volume, 25-fold higher than the density in liquid culture. Viable T. maritima were released from single-layer coatings at 80 degrees C but accurate measurement of the percentage of viable entrapped cells by plate counting was not successful. Metabolic activity could be measured in bilayer coatings by utilization of glucose and maltose, which was identical for latex-entrapped and suspended cells. Starch was hydrolyzed for 200 h by latex-entrapped cells due to the slow diffusion of starch through the polymer top coat compared to only 24 h by suspended T. maritima. The observed reactivity and stability of these coatings was surprising since cryo-SEM images suggested that the smaller low T(g) polyacrylate/styrene particles preferentially bound to the T. maritima toga-sheath during coat formation. This model system may be useful for concentrating, entrapment and stabilization of metabolically active hyperthermophiles at 80 degrees C.

Entities:  

Mesh:

Substances:

Year:  2005        PMID: 15778817     DOI: 10.1007/s00792-005-0434-7

Source DB:  PubMed          Journal:  Extremophiles        ISSN: 1431-0651            Impact factor:   2.395


  18 in total

1.  Microstructure Evolution in Polymer Latex Coatings for Whole-Cell Biocatalyst Application.

Authors: 
Journal:  J Colloid Interface Sci       Date:  1999-07-15       Impact factor: 8.128

Review 2.  Biotechnologically relevant enzymes from Thermus thermophilus.

Authors:  A A Pantazaki; A A Pritsa; D A Kyriakidis
Journal:  Appl Microbiol Biotechnol       Date:  2002-01       Impact factor: 4.813

3.  Production of cellulolytic enzymes by immobilized Sporotrichum thermophile.

Authors:  A Singh; R Goel; B N Johri
Journal:  Enzyme Microb Technol       Date:  1990-06       Impact factor: 3.493

4.  A single-use luciferase-based mercury biosensor using Escherichia coli HB101 immobilized in a latex copolymer film.

Authors:  O K Lyngberg; D J Stemke; J L Schottel; M C Flickinger
Journal:  J Ind Microbiol Biotechnol       Date:  1999-07       Impact factor: 3.346

5.  A model system for increasing the intensity of whole-cell biocatalysis: investigation of the rate of oxidation of D-sorbitol to L-sorbose by thin bi-layer latex coatings of non-growing Gluconobacter oxydans.

Authors:  M Fidaleo; S Charaniya; C Solheid; U Diel; M Laudon; H Ge; L E Scriven; M C Flickinger
Journal:  Biotechnol Bioeng       Date:  2006-10-20       Impact factor: 4.530

6.  Substrate and product inhibition of hydrogen production by the extreme thermophile, Caldicellulosiruptor saccharolyticus.

Authors:  Ed W J van Niel; Pieternel A M Claassen; Alfons J M Stams
Journal:  Biotechnol Bioeng       Date:  2003-02-05       Impact factor: 4.530

7.  Hydrogen production by the thermophilic bacterium Thermotoga neapolitana.

Authors:  Suellen A Van Ooteghem; Stephen K Beer; Paul C Yue
Journal:  Appl Biochem Biotechnol       Date:  2002       Impact factor: 2.926

8.  Growth kinetics of Bacillus stearothermophilus BR219.

Authors:  R M Worden; R Subramanian; M J Bly; S Winter; C L Aronson
Journal:  Appl Biochem Biotechnol       Date:  1991       Impact factor: 2.926

9.  Activation and regeneration of whole cell biocatalysts: initial and periodic induction behavior in starved Escherichia coli after immobilization in thin synthetic films.

Authors:  K L Swope; M C Flickinger
Journal:  Biotechnol Bioeng       Date:  1996-08-05       Impact factor: 4.530

10.  Purification and characterization of a highly thermostable glucose isomerase produced by the extremely thermophilic eubacterium, Thermotoga maritima.

Authors:  S H Brown; C Sjøholm; R M Kelly
Journal:  Biotechnol Bioeng       Date:  1993-04-15       Impact factor: 4.530

View more
  4 in total

1.  A versatile method for preparation of hydrated microbial-latex biocatalytic coatings for gas absorption and gas evolution.

Authors:  Jimmy L Gosse; Mari S Chinn; Amy M Grunden; Oscar I Bernal; Jessica S Jenkins; Chris Yeager; Sergey Kosourov; Michael Seibert; Michael C Flickinger
Journal:  J Ind Microbiol Biotechnol       Date:  2012-05-17       Impact factor: 3.346

2.  Spatial expression of a mercury-inducible green fluorescent protein within a nanoporous latex-based biosensor coating.

Authors:  Janet L Schottel; Paul M Orwin; C Ron Anderson; Michael C Flickinger
Journal:  J Ind Microbiol Biotechnol       Date:  2008-01-08       Impact factor: 3.346

Review 3.  Engineering Cellular Photocomposite Materials Using Convective Assembly.

Authors:  Jessica S Jenkins; Michael C Flickinger; Orlin D Velev
Journal:  Materials (Basel)       Date:  2013-05-07       Impact factor: 3.623

4.  Preservation of H₂ production activity in nanoporous latex coatings of Rhodopseudomonas palustris CGA009 during dry storage at ambient temperatures.

Authors:  M Piskorska; T Soule; J L Gosse; C Milliken; M C Flickinger; G W Smith; C M Yeager
Journal:  Microb Biotechnol       Date:  2013-07-01       Impact factor: 5.813

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.