Literature DB >> 15762678

Elastic modulus and stress-transfer properties of tunicate cellulose whiskers.

Adriana Sturcová1, Geoffrey R Davies, Stephen J Eichhorn.   

Abstract

Experimental deformation micromechanics of natural cellulose fibers using Raman spectroscopy and X-ray diffraction have been widely reported. However, little has been published on the direct measurements of the mechanical properties, and in particular the elastic modulus, of the highly crystalline material in the native state. Here we report on measurements of the elastic modulus of tunicate cellulose using a Raman spectroscopic technique. A dispersed sample of the material is deformed using a four-point bending test, and a shift in a characteristic Raman band (located at 1095 cm(-1)) is used as an indication of the stress in the material. Relatively little intensity change of the Raman band located at 1095 cm(-1) is shown to occur for samples oriented parallel and perpendicular to the polarization direction of the laser, as compared to a highly oriented flax sample. This indicates that the tunicate sample is a two-dimensional in-plane random network of fibers. By use of this result, the Raman shift, and calibrations with strain from other materials, it is shown that the modulus of the material is very high, at about 143 GPa, and a lack of Raman band broadening is thought to be due to the fact that there is pure crystalline deformation occurring without the effect of crystalline/amorphous fractions. A strain sensitivity of the shift in the 1095-cm(-1) Raman peak for this specimen is shown to be -2.4 +/- 0.2 cm(-1)/%. A molecular mechanics approach, using computer simulation and an empirical force field, was used to predict the modulus of a highly oriented chain of the material, and this is found to be 145 GPa, which is in agreement with the experimental data. However, by use of a normal-mode analysis, it is found that a number of modes have positions close to the central positions of the experimental Raman band. One in particular is found to shift at a rate of 2.5 cm(-1)/%, but due to the complex nature of the structure, it is not entirely conclusive that this band is representative of the experimental findings.

Entities:  

Mesh:

Substances:

Year:  2005        PMID: 15762678     DOI: 10.1021/bm049291k

Source DB:  PubMed          Journal:  Biomacromolecules        ISSN: 1525-7797            Impact factor:   6.988


  33 in total

Review 1.  Developing fibrillated cellulose as a sustainable technological material.

Authors:  Tian Li; Chaoji Chen; Alexandra H Brozena; J Y Zhu; Lixian Xu; Carlos Driemeier; Jiaqi Dai; Orlando J Rojas; Akira Isogai; Lars Wågberg; Liangbing Hu
Journal:  Nature       Date:  2021-02-03       Impact factor: 49.962

Review 2.  Bioinspired Bouligand cellulose nanocrystal composites: a review of mechanical properties.

Authors:  Bharath Natarajan; Jeffrey W Gilman
Journal:  Philos Trans A Math Phys Eng Sci       Date:  2018-02-13       Impact factor: 4.226

3.  Stimuli-responsive mechanically adaptive polymer nanocomposites.

Authors:  Kadhiravan Shanmuganathan; Jeffrey R Capadona; Stuart J Rowan; Christoph Weder
Journal:  ACS Appl Mater Interfaces       Date:  2010-01       Impact factor: 9.229

4.  Dielectric Characterization of Confined Water in Chiral Cellulose Nanocrystal Films.

Authors:  Bharath Natarajan; Caglar Emiroglu; Jan Obrzut; Douglas M Fox; Beatriz Pazmino; Jack F Douglas; Jeffrey W Gilman
Journal:  ACS Appl Mater Interfaces       Date:  2017-04-14       Impact factor: 9.229

5.  Hybrid supramolecular and colloidal hydrogels that bridge multiple length scales.

Authors:  Emma-Rose Janeček; Jason R McKee; Cindy S Y Tan; Antti Nykänen; Marjo Kettunen; Janne Laine; Olli Ikkala; Oren A Scherman
Journal:  Angew Chem Int Ed Engl       Date:  2015-03-13       Impact factor: 15.336

6.  How cellulose stretches: synergism between covalent and hydrogen bonding.

Authors:  Clemens M Altaner; Lynne H Thomas; Anwesha N Fernandes; Michael C Jarvis
Journal:  Biomacromolecules       Date:  2014-02-26       Impact factor: 6.988

7.  Flexible Photonic Cellulose Nanocrystal Films.

Authors:  Giulia Guidetti; Siham Atifi; Silvia Vignolini; Wadood Y Hamad
Journal:  Adv Mater       Date:  2016-10-17       Impact factor: 30.849

8.  Sustainable Wood Nanotechnologies for Wood Composites Processed by In-Situ Polymerization.

Authors:  Céline Montanari; Peter Olsén; Lars A Berglund
Journal:  Front Chem       Date:  2021-07-01       Impact factor: 5.221

Review 9.  Cellulose nanocrystals: synthesis, functional properties, and applications.

Authors:  Johnsy George; S N Sabapathi
Journal:  Nanotechnol Sci Appl       Date:  2015-11-04

10.  An in vitro testing strategy towards mimicking the inhalation of high aspect ratio nanoparticles.

Authors:  Carola Endes; Otmar Schmid; Calum Kinnear; Silvana Mueller; Sandra Camarero-Espinosa; Dimitri Vanhecke; E Johan Foster; Alke Petri-Fink; Barbara Rothen-Rutishauser; Christoph Weder; Martin J D Clift
Journal:  Part Fibre Toxicol       Date:  2014-09-23       Impact factor: 9.400

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.