Literature DB >> 1573074

Measurement of water sorption by resin composite adhesives with near-infrared spectroscopy.

A M Diaz-Arnold1, M A Arnold, V D Williams.   

Abstract

Spectroscopic methodology was used to follow the water uptake of disks of two resin composite luting agents during long-term storage. Fourier-transform near-infrared (FT-NIR) spectroscopy was used for collection of spectra over the 4200-6500 cm-1 spectral region. The 5200-cm-1 absorption band of water was monitored initially, at 24 h, seven days, two weeks, and then monthly over a period of 12 months. The disks were stored in water, air, and desiccated conditions. Disks were also subjected to two alternate cycles (two weeks each) of hydration and desiccation. A spectral manipulation program was used for quantitation of the area under the water absorbance band. Area ratios demonstrated similar water-uptake patterns for the two adhesives. Rapid water uptake was seen within the first two weeks of storage. Alternate hydration and desiccation of the samples showed that water uptake by the filler/polymer network was partially reversible. The desiccant was unable to remove all the water from the samples, which indicated that some water was tightly held within the sample matrix. FT-NIR spectroscopy is recommended as an effective method for study of the equilibration of resin composites in water.

Entities:  

Mesh:

Substances:

Year:  1992        PMID: 1573074     DOI: 10.1177/00220345920710030301

Source DB:  PubMed          Journal:  J Dent Res        ISSN: 0022-0345            Impact factor:   6.116


  8 in total

1.  Near-infrared imaging of secondary caries lesions around composite restorations at wavelengths from 1300-1700-nm.

Authors:  Jacob C Simon; Seth A Lucas; Robert C Lee; Cynthia L Darling; Michal Staninec; Ram Vaderhobli; Roger Pelzner; Daniel Fried
Journal:  Dent Mater       Date:  2016-02-11       Impact factor: 5.304

2.  In vitro near-infrared imaging of natural secondary caries.

Authors:  Jacob C Simon; Seth Lucas; Robert Lee; Cynthia L Darling; Michal Staninec; Ram Vanderhobli; Roger Pelzner; Daniel Fried
Journal:  Proc SPIE Int Soc Opt Eng       Date:  2015-02-24

3.  Effects of water content and initiator composition on photopolymerization of a model BisGMA/HEMA resin.

Authors:  Xinglin Guo; Yong Wang; Paulette Spencer; Qiang Ye; Xiaomei Yao
Journal:  Dent Mater       Date:  2007-11-28       Impact factor: 5.304

4.  Color stability, Roughness, and Microhardness of Enamel and Composites Submitted to Staining/Bleaching Cycles.

Authors:  Sarah S Al-Angari; George J Eckert; Alaa H A Sabrah
Journal:  Saudi Dent J       Date:  2020-08-11

5.  Evaluation of formulation properties and skin penetration in the same additive-containing formulation.

Authors:  Yutaka Inoue; Kensuke Suzuki; Rikimaru Maeda; Arisa Shimura; Isamu Murata; Ikuo Kanamoto
Journal:  Results Pharma Sci       Date:  2014-09-23

6.  Relationship between the usability and physicochemical properties of triamcinolone acetonide ointments.

Authors:  Yutaka Inoue; Rikimaru Maeda; Kayoko Furuya; Murata Isamu; Kimura Masayuki; Ikuo Kanamoto
Journal:  Results Pharma Sci       Date:  2013-11-06

7.  The Comparison of Sorption and Solubility Behavior of Four Different Resin Luting Cements in Different Storage Media.

Authors:  Rashin Giti; Mahroo Vojdani; Jaafar Abduo; Rafat Bagheri
Journal:  J Dent (Shiraz)       Date:  2016-06

8.  Comparison of various pharmaceutical properties of clobetasol propionate cream formulations - considering stability of mixture with moisturizer.

Authors:  Yoshihisa Yamamoto; Yoshinori Onuki; Toshiro Fukami; Tatsuo Koide
Journal:  J Pharm Health Care Sci       Date:  2020-01-30
  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.