Literature DB >> 15730596

Oxygen delivery using self-inflating resuscitation bags.

Bradley G Carter1, Bronwyn Fairbank, James Tibballs, Mark Hochmann, Anthony Osborne.   

Abstract

OBJECTIVE: Oxygen-filled self-inflating resuscitators are used by some as a source of oxygen for spontaneously breathing patients. In this application, the bag is not compressed and oxygen is assumed to flow freely from the patient outlet through a mask positioned loosely over the patient's face. We tested 11 resuscitators to determine the delivery of oxygen from the patient outlet using different inlet flows.
DESIGN: Bench test.
SETTING: A pediatric intensive care unit.
INTERVENTIONS: Patient outlet flow was measured at inlet flows of 5, 10, and 15 L/min at two different orientations of the reservoir valve assembly (upright and inverted).
MEASUREMENTS AND MAIN RESULTS: Patient outlet flow varied between resuscitators but was always less than the inlet flow and, in some cases, was as little as approximately 20% of the inlet flow. As the inlet flow rate was increased, the percentage of outlet flow that a patient received decreased, particularly in the upright position. At inlet flows of 5, 10, and 15 L/min, patient outlet flow ranged from 1.1 to 4.6 L/min, 1.6 to 5.1 L/min, and 2.0 to 6.5 L/min, respectively.
CONCLUSIONS: Self-inflating resuscitators deliver a significantly lower flow of oxygen than the provided inlet flow and should not be relied on to deliver a precise amount of flow of oxygen to spontaneously breathing patients.

Entities:  

Mesh:

Substances:

Year:  2005        PMID: 15730596     DOI: 10.1097/01.PCC.0000154945.05394.A9

Source DB:  PubMed          Journal:  Pediatr Crit Care Med        ISSN: 1529-7535            Impact factor:   3.624


  1 in total

1.  Free-flow oxygen delivery to newly born infants.

Authors:  Jennifer A Dawson; Peter G Davis; Colm P F O'Donnell; C Omar F Kamlin; Colin J Morley
Journal:  Arch Dis Child Fetal Neonatal Ed       Date:  2006-11-01       Impact factor: 5.747

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.