Literature DB >> 15726798

Effect of bleaching and repolishing procedures on coffee and tea stain removal from three anterior composite veneering materials.

L Sebnem Türkün1, Murat Türkün.   

Abstract

UNLABELLED: Discolored teeth can be treated with resin veneers, but their color changes when confronted with staining solutions. Polishing procedures can provide a remedy for highly stained composites, but they tend to remove some materials as well. However, bleaching procedures are an effective, nondestructive method for solving the problem. The aim of this study was to compare the color change of three veneer composites exposed to staining solutions and to evaluate the effectiveness of a 15% hydrogen peroxide bleaching agent and three polishing systems to remove the stain. Forty-five disks (12 x 2 mm) each of Clearfil ST (Kuraray Co. Ltd., Osaka, Japan), Esthet-X (Dentsply/Caulk, Milford DE, USA), and Filtek A110 (3M ESPE, St. Paul, MN, USA) were prepared. The specimens were polished with Sof-Lex (3M ESPE), Enhance (Dentsply/Caulk), or PoGo (Dentsply/Caulk). Five specimens for each material-polishing system combination were immersed in coffee (Nescafe Classic, Nestle SA, Vevey, Switzerland) or tea (Earl Grey, Lipton, Blackfriars-London, England) for 7 days. The remaining disks were stored in water. Color measurements were made with a spectrophotometer (X-Rite Seroice SP78, Loaner, Köln, Germany) at baseline; after 1, 3, 5, and 7 days; and after bleaching and repolishing. After 1 week, one side of the specimens was bleached with Illuminé-office (Dentsply De Trey GmbH, Konstanz, Germany) for 1 hour, and the other side was repolished for 30 seconds. All comparisons of color change for the polishing systems, times, and staining solutions were subjected to repeated measurements of analysis of variance. Paired t-test was used to examine whether significant color differences (deltaE*) occurred during immersion at the specified time intervals (p < or = .05). Filtek A110 was the least stained resin composite. Its color remained under a deltaE* value of 2 during the study. Clearfil ST exhibited the most color change after 1 week. All specimens polished with Enhance showed less staining, whereas those polished with the Sof-Lex system demonstrated the most color change. Water did not cause a variance in the deltaE*. There was no difference in the staining potential of coffee and tea. Bleaching and repolishing were effective in removing the stains. The resin composites tested reversed nearly to baseline color with the bleaching and to less than values at 1 day of staining with repolishing. The coffee and tea brands tested stained the composites used in this study equally. In-office bleaching was found to be more effective than repolishing in the restitution of the color. CLINICAL SIGNIFICANCE: The results of this study suggest that the discoloration of resin veneers can be partially removed by in-office bleaching and repolishing procedures.

Entities:  

Mesh:

Substances:

Year:  2004        PMID: 15726798     DOI: 10.1111/j.1708-8240.2004.tb00056.x

Source DB:  PubMed          Journal:  J Esthet Restor Dent        ISSN: 1496-4155            Impact factor:   2.843


  22 in total

1.  Effects of cold light bleaching on the color stability of composite resins.

Authors:  Liqun Cao; Lijuan Huang; Meisheng Wu; Hua Wei; Shouliang Zhao
Journal:  Int J Clin Exp Med       Date:  2015-06-15

2.  Color change of some aesthetic dental materials: Effect of immersion solutions and finishing of their surfaces.

Authors:  Elizabeth Sarkis
Journal:  Saudi Dent J       Date:  2012-03-10

Review 3.  Tooth-bleaching procedures and their controversial effects: A literature review.

Authors:  Mohammed Q Alqahtani
Journal:  Saudi Dent J       Date:  2014-03-12

4.  The effectiveness of four methods for stain removal from direct resin-based composite restorative materials.

Authors:  Hend Nahedh Al-Nahedh; Wedad Yassin Awliya
Journal:  Saudi Dent J       Date:  2013-03-17

5.  Evaluating the Role of Hydrophobic and Cationic Appendages on the Laundry Performance of Modified Hydroxyethyl Celluloses.

Authors:  Marcellino D'Avino; Ruth Chilton; Si Gang; Mark R Sivik; David A Fulton
Journal:  Ind Eng Chem Res       Date:  2022-09-14       Impact factor: 4.326

6.  Color stability, Roughness, and Microhardness of Enamel and Composites Submitted to Staining/Bleaching Cycles.

Authors:  Sarah S Al-Angari; George J Eckert; Alaa H A Sabrah
Journal:  Saudi Dent J       Date:  2020-08-11

7.  Effect of natural and commercially produced juices on colour stability of microhybrid and nanohybrid composites.

Authors:  Razieh Meshki; Marjan Rashidi
Journal:  BDJ Open       Date:  2022-04-20

8.  Influence of different drinks on the colour stability of dental resin composites.

Authors:  Fulya Toksoy Topcu; Gunes Sahinkesen; Kivanc Yamanel; Ugur Erdemir; Elif Aybala Oktay; Seyda Ersahan
Journal:  Eur J Dent       Date:  2009-01

9.  Considerations regarding the optical properties of the composite resin restorative materials.

Authors:  H Manolea; R Râcă; Evantia Coleş; Gabriela Preotu; P Mărăşescu
Journal:  Curr Health Sci J       Date:  2011-08-21

10.  Multiple logistic regression analysis of risk factors associated with denture plaque and staining in Chinese removable denture wearers over 40 years old in Xi'an--a cross-sectional study.

Authors:  Yanwei Yang; Hongchen Zhang; Zhiguo Chai; Jihua Chen; Shaofeng Zhang
Journal:  PLoS One       Date:  2014-02-03       Impact factor: 3.240

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.