Literature DB >> 15667186

Protein resistance of surfaces prepared by sorption of end-thiolated poly(ethylene glycol) to gold: effect of surface chain density.

Larry D Unsworth1, Heather Sheardown, John L Brash.   

Abstract

Nonspecific protein adsorption generally occurs at the biomaterial-tissue interface and usually has adverse consequences. Thus, surfaces that are protein-resistant are eagerly sought with the expectation that these materials will exhibit improved biocompatibility. Surfaces modified with end-tethered poly(ethylene oxide) (PEO) have been shown to be protein-resistant to some degree. Although the mechanisms are unclear, it has been suggested that chain length, chain density, and chain conformation are important factors. To investigate the effects of PEO chain density, we selected a model system based on the chemisorption of chain-end thiolated PEO to a gold substrate. Chain density was varied by varying PEO solubility (proximity to cloud point) and incubation time in the chemisorption solution. The adsorption of fibrinogen and lysozyme to these surfaces was investigated. It was found that for 750 and 2000 MW PEO layers, resistance to fibrinogen increased with chain density and was maximal at a density of approximately 0.5 chains/nm(2) (80% decrease in adsorption compared to unmodified gold). As PEO chain density increased beyond 0.5/nm(2) adsorption increased. For PEO of 5000 MW the optimal chain density was 0.27/nm(2) and gave only a 60% reduction in fibrinogen adsorption. It is suggested that, at high chain density, the chemisorbed PEO is dehydrated giving a surface that is no longer protein resistant. The PEO-modified surfaces were found also to be resistant to lysozyme adsorption with reductions similar to, if somewhat less than, those for fibrinogen. The fibrinogen to lysozyme molar ratios were within the expected range for close-packed layers of these proteins in their native conformation and were relatively insensitive to PEO chain density and MW. This may suggest that such adsorption as did occur, even at chain densities giving minimum adsorption, may have been on patches of unmodified gold.

Entities:  

Mesh:

Substances:

Year:  2005        PMID: 15667186     DOI: 10.1021/la047672d

Source DB:  PubMed          Journal:  Langmuir        ISSN: 0743-7463            Impact factor:   3.882


  19 in total

1.  Quantifying the coverage density of poly(ethylene glycol) chains on the surface of gold nanostructures.

Authors:  Xiaohu Xia; Miaoxin Yang; Yucai Wang; Yiqun Zheng; Qingge Li; Jingyi Chen; Younan Xia
Journal:  ACS Nano       Date:  2011-12-19       Impact factor: 15.881

2.  Multifunctional Dendrimer-templated Antibody Presentation on Biosensor Surfaces for Improved Biomarker Detection.

Authors:  Hye Jung Han; Rangaramanujam M Kannan; Sunxi Wang; Guangzhao Mao; Juan Pedro Kusanovic; Roberto Romero
Journal:  Adv Funct Mater       Date:  2010-02-08       Impact factor: 18.808

3.  Fabrication and anti-fouling properties of photochemically and thermally immobilized poly(ethylene oxide) and low molecular weight poly(ethylene glycol) thin films.

Authors:  Hui Wang; Jin Ren; Aye Hlaing; Mingdi Yan
Journal:  J Colloid Interface Sci       Date:  2010-10-14       Impact factor: 8.128

4.  Reduced acute inflammatory responses to microgel conformal coatings.

Authors:  Amanda W Bridges; Neetu Singh; Kellie L Burns; Julia E Babensee; L Andrew Lyon; Andrés J García
Journal:  Biomaterials       Date:  2008-09-19       Impact factor: 12.479

5.  Quantum Dot Surface Engineering: Toward Inert Fluorophores with Compact Size and Bright, Stable Emission.

Authors:  Sung Jun Lim; Liang Ma; André Schleife; Andrew M Smith
Journal:  Coord Chem Rev       Date:  2016-04-19       Impact factor: 22.315

6.  Dense and Dynamic Polyethylene Glycol Shells Cloak Nanoparticles from Uptake by Liver Endothelial Cells for Long Blood Circulation.

Authors:  Hao Zhou; Zhiyuan Fan; Peter Y Li; Junjie Deng; Dimitrios C Arhontoulis; Christopher Y Li; Wilbur B Bowne; Hao Cheng
Journal:  ACS Nano       Date:  2018-08-23       Impact factor: 15.881

7.  The role of complement C3 and fibrinogen in monocyte adhesion to PEO-like plasma deposited tetraglyme.

Authors:  Luisa M Szott; Thomas A Horbett
Journal:  J Biomed Mater Res A       Date:  2010-10-11       Impact factor: 4.396

8.  Shrinkage of pegylated and non-pegylated liposomes in serum.

Authors:  Joy Wolfram; Krishna Suri; Yong Yang; Jianliang Shen; Christian Celia; Massimo Fresta; Yuliang Zhao; Haifa Shen; Mauro Ferrari
Journal:  Colloids Surf B Biointerfaces       Date:  2013-10-24       Impact factor: 5.268

9.  A functionalized poly(ethylene glycol)-based bioassay surface chemistry that facilitates bio-immobilization and inhibits non-specific protein, bacterial, and mammalian cell adhesion.

Authors:  Gregory M Harbers; Kazunori Emoto; Charles Greef; Steven W Metzger; Heather N Woodward; James J Mascali; David W Grainger; Michael J Lochhead
Journal:  Chem Mater       Date:  2007       Impact factor: 9.811

10.  Nonfouling poly(ethylene oxide) layers end-tethered to polydopamine.

Authors:  Ognen Pop-Georgievski; Dominique Verreault; Mark-Oliver Diesner; Vladimír Proks; Stefan Heissler; František Rypáček; Patrick Koelsch
Journal:  Langmuir       Date:  2012-09-28       Impact factor: 3.882

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.