Literature DB >> 15616743

An endothelial and astrocyte co-culture model of the blood-brain barrier utilizing an ultra-thin, nanofabricated silicon nitride membrane.

Sarina Harris Ma1, Lori A Lepak, Rifat J Hussain, William Shain, Michael L Shuler.   

Abstract

The endothelial cells comprising brain capillaries have extremely tight intercellular junctions which form an essentially impermeable barrier to passive transport of water soluble molecules between the blood and brain. Several in vitro models of the blood-brain barrier (BBB) have been studied, most utilizing commercially available polymer membranes affixed to plastic inserts. There is mounting evidence that direct contact between endothelial cells and astrocytes, another cell type found to have intimate interaction with the brain side of BBB capillaries, is at least partially responsible for the development of the tight intercellular junctions between BBB endothelial cells. However, the membranes commonly used for BBB in vitro models are lacking certain attributes that would permit a high degree of direct contact between astrocytes and endothelial cells cultured on opposing sides. This work is based on the hypothesis that co-culturing endothelial and astrocyte cells on opposite sides of an ultra-thin, highly porous membrane will allow for increased direct interaction between the two cell types and therefore result in a better model of the BBB. We used standard nanofabrication techniques to make membranes from low-stress silicon nitride that are at least an order of magnitude thinner and at least two times more porous than commercial membrane inserts. An experimental survey of pore sizes for the silicon nitride membranes suggested pores approximately 400 nm in diameter are adequate for restricting astrocyte cell bodies to the seeded side while allowing astrocyte processes to pass through the pores and interact with endothelial cells on the opposite side. The inclusion of a spun-on, cross-linked collagen membrane allowed for astrocyte attachment and culture on the membranes for over two weeks. Astrocytes and endothelial cells displayed markers specific to their cell types when grown on the silicon nitride membranes. The transendothelial electrical resistances, a measure of barrier tightness, of endothelial and astrocyte co-cultures on the silicon nitride membranes were comparable to the commercial membranes, but neither system showed synergy between the two cell types in forming a tighter barrier. This lack of synergy may have been due to the loss of ability of commercially available primary bovine brain microvascular endothelial cells to respond to astrocyte differentiating signals.

Entities:  

Mesh:

Substances:

Year:  2004        PMID: 15616743     DOI: 10.1039/b405713a

Source DB:  PubMed          Journal:  Lab Chip        ISSN: 1473-0189            Impact factor:   6.799


  37 in total

1.  Membrane-integrated microfluidic device for high-resolution live cell imaging.

Authors:  Alla A Epshteyn; Steven Maher; Amy J Taylor; Angela B Holton; Jeffrey T Borenstein; Joseph D Cuiffi
Journal:  Biomicrofluidics       Date:  2011-10-17       Impact factor: 2.800

2.  Ultrathin transparent membranes for cellular barrier and co-culture models.

Authors:  Robert N Carter; Stephanie M Casillo; Andrea R Mazzocchi; Jon-Paul S DesOrmeaux; James A Roussie; Thomas R Gaborski
Journal:  Biofabrication       Date:  2017-02-14       Impact factor: 9.954

3.  Biomedical Technologies for in vitro Screening and Controlled Delivery of Neuroactive Compounds.

Authors:  John P Frampton; Michael L Shuler; William Shain; Matthew R Hynd
Journal:  Cent Nerv Syst Agents Med Chem       Date:  2008

4.  Microfabrication of human organs-on-chips.

Authors:  Dongeun Huh; Hyun Jung Kim; Jacob P Fraser; Daniel E Shea; Mohammed Khan; Anthony Bahinski; Geraldine A Hamilton; Donald E Ingber
Journal:  Nat Protoc       Date:  2013-10-10       Impact factor: 13.491

5.  Improved method for the preparation of a human cell-based, contact model of the blood-brain barrier.

Authors:  Be'eri Niego; Robert L Medcalf
Journal:  J Vis Exp       Date:  2013-11-12       Impact factor: 1.355

6.  Collagen-based brain microvasculature model in vitro using three-dimensional printed template.

Authors:  Jeong Ah Kim; Hong Nam Kim; Sun-Kyoung Im; Seok Chung; Ji Yoon Kang; Nakwon Choi
Journal:  Biomicrofluidics       Date:  2015-04-15       Impact factor: 2.800

7.  Microfabrication of High-Resolution Porous Membranes for Cell Culture.

Authors:  Monica Y Kim; David Jiang Li; Long K Pham; Brandon G Wong; Elliot E Hui
Journal:  J Memb Sci       Date:  2014-02-15       Impact factor: 8.742

8.  Multifunction co-culture model for evaluating cell-cell interactions.

Authors:  Danielle R Bogdanowicz; Helen H Lu
Journal:  Methods Mol Biol       Date:  2014

9.  Robust and Gradient Thickness Porous Membranes for In Vitro Modeling of Physiological Barriers.

Authors:  Shayan Gholizadeh; Zahra Allahyari; Robert Carter; Luis F Delgadillo; Marine Blaquiere; Frederic Nouguier-Morin; Nicola Marchi; Thomas R Gaborski
Journal:  Adv Mater Technol       Date:  2020-11-09

Review 10.  Microfluidic systems for stem cell-based neural tissue engineering.

Authors:  Mahdi Karimi; Sajad Bahrami; Hamed Mirshekari; Seyed Masoud Moosavi Basri; Amirala Bakhshian Nik; Amir R Aref; Mohsen Akbari; Michael R Hamblin
Journal:  Lab Chip       Date:  2016-07-05       Impact factor: 6.799

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.