Literature DB >> 15606651

An attempt to improve diagnostics of contact allergy due to epoxy resin systems. First results of the multicentre study EPOX 2002.

Johannes Geier1, Holger Lessmann, Uwe Hillen, Uta Jappe, Heinrich Dickel, Patrick Koch, Peter J Frosch, Axel Schnuch, Wolfgang Uter.   

Abstract

Epoxy resin systems (ERSs) are a frequent cause of occupational allergic contact dermatitis. Sensitization occurs not only to the resins, but also to hardeners and reactive diluents. However, only a fraction of the ERS components currently in use are available for patch testing. With the multicentre study EPOX 2002, we attempted to improve diagnostics in this field by patch testing with components currently used in ERSs. During the first study period (October 2002 to July 2003), in addition to commercially available ERS patch test substances, 16 study substances (1 resin, 9 hardeners and 6 reactive diluents) were patch tested in 70 patients with suspected contact allergy due to ERSs and 22 patients with a prior positive patch test reaction to epoxy resin (ER) in the standard series. Most frequently, allergic reactions to ER based on diglycidyl ether of bisphenol A and F were observed (55.2% and 43.7%, respectively). Agreement between positive reactions to both resins, which can be explained by immunological cross-sensitization and/or coexposure, was substantial [Cohen's kappa 0.65 (95% CI: 0.49-0.80)]. Among the reactive diluents, 1,6-hexanediol diglycidyl ether (1,6-HDDGE) and 1,4-butanediol diglycidyl ether (1,4-BDDGE) were the most frequent allergens, with 19.5% and 18.4% positive reactions, respectively. Although agreement between positive reactions to 1,6-HDDGE and 1,4-BDDGE was even better than with the 2 resins, the sample size is considered too small to decide reliably whether 1,6-HDDGE alone could serve as a marker allergen for both. Allergic reactions to p-tert-butylphenyl glycidyl ether and to phenyl glycidyl ether (PGE) occurred in 11.5% of the patients tested, with only moderate agreement. All patients positive to cresyl glycidyl ether (6.8%) also reacted to PGE. Of the hardeners tested, m-xylylene diamine was the most frequent allergen (13.8%), followed by isophorone diamine (5.7%). No reactions were observed to several substances, the test concentration of which may have been too low and will be increased in the future.

Entities:  

Mesh:

Substances:

Year:  2004        PMID: 15606651     DOI: 10.1111/j.0105-1873.2004.00465.x

Source DB:  PubMed          Journal:  Contact Dermatitis        ISSN: 0105-1873            Impact factor:   6.600


  8 in total

Review 1.  [New contact allergens for patch testing. A phase-out-model?].

Authors:  D Becker
Journal:  Hautarzt       Date:  2009-01       Impact factor: 0.751

Review 2.  [Allergological diagnostics and current allergens in occupational dermatology].

Authors:  J Geier; A Krautheim; H Lessmann
Journal:  Hautarzt       Date:  2009-09       Impact factor: 0.751

3.  Occupational sensitization to epoxy resins in Northeastern Italy (1996-2010).

Authors:  Andrea Prodi; Francesca Rui; Anna Belloni Fortina; Maria Teresa Corradin; Francesca Larese Filon
Journal:  Int J Occup Environ Health       Date:  2015

4.  Occupational contact allergy in the building trade in Germany: influence of preventive measures and changing exposure.

Authors:  Johannes Geier; Andrea Krautheim; Wolfgang Uter; Holger Lessmann; Axel Schnuch
Journal:  Int Arch Occup Environ Health       Date:  2010-09-24       Impact factor: 3.015

5.  [Contact allergies in the German workforce : Data of the IVDK network from 2003-2013].

Authors:  A Bauer; J Geier; V Mahler; W Uter
Journal:  Hautarzt       Date:  2015-09       Impact factor: 0.751

6.  Nature-derived epoxy resins: Synthesis, allergenicity, and thermosetting properties of pinoresinol diglycidyl ether.

Authors:  Niamh M O'Boyle; Ida B Niklasson; David J Ponting; Miguel A Ortega; Tina Seifert; Andreas Natsch; Kristina Luthman; Ann-Therese Karlberg
Journal:  Toxicol Ind Health       Date:  2022-04-24       Impact factor: 1.851

Review 7.  In vitro methods for hazard assessment of industrial chemicals - opportunities and challenges.

Authors:  Chin Lin Wong; Sussan Ghassabian; Maree T Smith; Ai-Leen Lam
Journal:  Front Pharmacol       Date:  2015-05-05       Impact factor: 5.810

8.  Toxicity Assessment of a Single Dose of Poly(ethylene glycol) Diglycidyl Ether (PEGDE) Administered Subcutaneously in Mice.

Authors:  Do-Hyun Kim; Jong-Hyeon Han; Hyuk-Cheol Kwon; Su-Jin Lim; Seo-Gu Han; Hyun-Su Jung; Keyong-Ho Lee; Ju-Hee Kang; Sung-Gu Han
Journal:  Toxics       Date:  2021-12-15
  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.