Literature DB >> 15568841

Wettability interpretation of oxygen plasma modified poly(methyl methacrylate).

Jinan Chai1, Fuzhi Lu, Baoming Li, Daniel Y Kwok.   

Abstract

Poly(methyl methacrylate) (PMMA) has been modified via a dc pulsed oxygen plasma for different treatment times. The modified surfaces were characterized by X-ray photoelectron spectroscopy (XPS), optical profilometer, zeta potential, and advancing contact angle measurements. The measured advancing contact angles of water decreased considerably as a function of discharge. Several oxygen-based functionalities (carbonyl, carboxyl, carbonate, etc.) were detected by XPS, while zeta potential measurements confirmed an increase in negative charge for the treated PMMA surface. Evaluating the correlation between the concentration of polar chemical species and zeta potential, we found that increase in surface hydrophilicity results from the coeffect due to incorporation of oxygen functional groups and creation of charge states. The electrical double layer (EDL) effect was also considered in contact angle interpretation by introducing an additional surface tension term into Young's equation. We also found that EDL contribution to the solid-liquid interfacial tension is negligible and can be safely ignored for the systems considered here.

Entities:  

Mesh:

Substances:

Year:  2004        PMID: 15568841     DOI: 10.1021/la048947s

Source DB:  PubMed          Journal:  Langmuir        ISSN: 0743-7463            Impact factor:   3.882


  11 in total

1.  Surface charge, electroosmotic flow and DNA extension in chemically modified thermoplastic nanoslits and nanochannels.

Authors:  Franklin I Uba; Swathi R Pullagurla; Nichanun Sirasunthorn; Jiahao Wu; Sunggook Park; Rattikan Chantiwas; Yoon-Kyoung Cho; Heungjoo Shin; Steven A Soper
Journal:  Analyst       Date:  2015-01-07       Impact factor: 4.616

Review 2.  Flexible fabrication and applications of polymer nanochannels and nanoslits.

Authors:  Rattikan Chantiwas; Sunggook Park; Steven A Soper; Byoung Choul Kim; Shuichi Takayama; Vijaya Sunkara; Hyundoo Hwang; Yoon-Kyoung Cho
Journal:  Chem Soc Rev       Date:  2011-03-25       Impact factor: 54.564

3.  Oxygen and nitrogen plasma hydrophilization and hydrophobic recovery of polymers.

Authors:  Ville Jokinen; Pia Suvanto; Sami Franssila
Journal:  Biomicrofluidics       Date:  2012-01-03       Impact factor: 2.800

4.  High process yield rates of thermoplastic nanofluidic devices using a hybrid thermal assembly technique.

Authors:  Franklin I Uba; Bo Hu; Kumuditha Weerakoon-Ratnayake; Nyote Oliver-Calixte; Steven A Soper
Journal:  Lab Chip       Date:  2015-02-21       Impact factor: 6.799

5.  Characterization and performance of injection molded poly(methylmethacrylate) microchips for capillary electrophoresis.

Authors:  Irena Nikcevic; Se Hwan Lee; Aigars Piruska; Chong H Ahn; Thomas H Ridgway; Patrick A Limbach; K R Wehmeyer; William R Heineman; Carl J Seliskar
Journal:  J Chromatogr A       Date:  2007-04-06       Impact factor: 4.759

6.  Hybrid optical materials of plasmon-coupled CdSe/ZnS coreshells for photonic applications.

Authors:  Jaetae Seo; Rafal Fudala; Wan-Joong Kim; Ryan Rich; Bagher Tabibi; Hyoyeong Cho; Zygmunt Gryczynski; Ignacy Gryczynski; William Yu
Journal:  Opt Mater Express       Date:  2012-07-05       Impact factor: 3.442

7.  Electrokinetic identification of ribonucleotide monophosphates (rNMPs) using thermoplastic nanochannels.

Authors:  Charuni A Amarasekara; Chathurika Rathnayaka; Uditha S Athapattu; Lulu Zhang; Junseo Choi; Sunggook Park; Aaron C Nagel; Steven A Soper
Journal:  J Chromatogr A       Date:  2021-01-08       Impact factor: 4.759

Review 8.  State of the art in nonthermal plasma processing for biomedical applications: Can it help fight viral pandemics like COVID-19?

Authors:  Nilanjal Misra; Sudhir Bhatt; Farzaneh Arefi-Khonsari; Virendra Kumar
Journal:  Plasma Process Polym       Date:  2021-05-13       Impact factor: 3.877

9.  Patterned immobilization of antibodies within roll-to-roll hot embossed polymeric microfluidic channels.

Authors:  Belachew Feyssa; Christina Liedert; Liisa Kivimaki; Leena-Sisko Johansson; Heli Jantunen; Leena Hakalahti
Journal:  PLoS One       Date:  2013-07-18       Impact factor: 3.240

10.  Surface functionalization of acrylic based photocrosslinkable resin for 3D printing applications.

Authors:  A Ronca; F Maiullari; M Milan; V Pace; A Gloria; R Rizzi; R De Santis; L Ambrosio
Journal:  Bioact Mater       Date:  2017-04-21
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.