PURPOSE: To understand the phase behavior and the degree and mechanism of the solid solubility in amorphous molecular dispersions by the use of thermal analysis. METHODS: Amorphous molecular dispersions of trehalose-dextran and trehalose-PVP were prepared by co-lyophilization. The mixtures were exposed to 23 degrees C, 40 degrees C, and 50 degrees C [75% relative humidity (RH)] and 23 degrees C (69% RH) storage conditions, respectively. Thermal analysis was conducted by modulated differential scanning calorimeter (MDSC). RESULTS: Upon exposure to moisture, two glass transition temperatures (TgS), one for phase-separated amorphous trehalose (Tg1) and the other for polymer-trehalose mixture (Tg2), were observed. With time, Tg2 increased and reached to a plateau (Tg(eq)), whereas Tg1 disappeared. The disappearance of Tg1 was attributed to crystallization of the phase-separated amorphous trehalose. It was observed that Tg(eq) was always less than Tg of pure polymer. The lower Tg(eq) when compared to Tg of pure polymer may be the result of solubility of a fraction of trehalose in the polymers chosen. The miscible fraction of trehalose was estimated to be 12% and 18% wt/wt in dextran at 50 degrees C/75% RH and 23 degrees C/75% RH, respectively, and 10% wt/wt in PVP at 23 degrees C/69% RH. CONCLUSIONS: Mixing behavior of trehalose-dextran and trehalose-PVP dispersions were examined both experimentally and theoretically. A method determining the "extent of molecular miscibility," referred to as "solid solubility," was developed and mechanistically and thermodynamically analyzed. Solid dispersions prepared at trehalose concentrations below the "solid solubility limit" were physically stable even under accelerated stability conditions.
PURPOSE: To understand the phase behavior and the degree and mechanism of the solid solubility in amorphous molecular dispersions by the use of thermal analysis. METHODS: Amorphous molecular dispersions of trehalose-dextran and trehalose-PVP were prepared by co-lyophilization. The mixtures were exposed to 23 degrees C, 40 degrees C, and 50 degrees C [75% relative humidity (RH)] and 23 degrees C (69% RH) storage conditions, respectively. Thermal analysis was conducted by modulated differential scanning calorimeter (MDSC). RESULTS: Upon exposure to moisture, two glass transition temperatures (TgS), one for phase-separated amorphous trehalose (Tg1) and the other for polymer-trehalose mixture (Tg2), were observed. With time, Tg2 increased and reached to a plateau (Tg(eq)), whereas Tg1 disappeared. The disappearance of Tg1 was attributed to crystallization of the phase-separated amorphous trehalose. It was observed that Tg(eq) was always less than Tg of pure polymer. The lower Tg(eq) when compared to Tg of pure polymer may be the result of solubility of a fraction of trehalose in the polymers chosen. The miscible fraction of trehalose was estimated to be 12% and 18% wt/wt in dextran at 50 degrees C/75% RH and 23 degrees C/75% RH, respectively, and 10% wt/wt in PVP at 23 degrees C/69% RH. CONCLUSIONS: Mixing behavior of trehalose-dextran and trehalose-PVP dispersions were examined both experimentally and theoretically. A method determining the "extent of molecular miscibility," referred to as "solid solubility," was developed and mechanistically and thermodynamically analyzed. Solid dispersions prepared at trehalose concentrations below the "solid solubility limit" were physically stable even under accelerated stability conditions.
Authors: Karel Six; Hugo Berghmans; Christian Leuner; Jennifer Dressman; Kristof Van Werde; Jules Mullens; Luc Benoist; Mireille Thimon; Laurent Meublat; Geert Verreck; Jef Peeters; Marcus Brewster; Guy Van den Mooter Journal: Pharm Res Date: 2003-07 Impact factor: 4.200
Authors: Sonal V Bhujbal; Dmitry Y Zemlyanov; Alex Cavallaro; Sharad Mangal; Lynne S Taylor; Qi Tony Zhou Journal: Mol Pharm Date: 2018-04-17 Impact factor: 4.939