Graham Buckton1, Ameet Ambarkhane, Kim Pincott. 1. Department of Pharmaceutics, School of Pharmacy, University of London, London WC1N 1AX, UK. Graham.buckton@ulsop.ac.uk
Abstract
PURPOSE: To measure the glass transition temperature (Tg) at the surface of a hydrophobic particle at different temperatures and humidities, on the hypothesis that the surface may be plasticized to a different extent to the bulk due to slow water sorption giving a concentration gradient of water through the particles. METHODS: Amorphous indomethacin was exposed to a range of relative humidities (RH) and temperatures in an inverse gas chromatograph (IGC). The retention volumes of decane were calculated at all conditions using center of mass (Vcom) and peak height (Vmax) methods. The extent of water sorption was determined gravimetrically. RESULTS: The Vcom retention volumes were found to deviate from Vmax results at certain critical humidities at each temperature. This was taken as a novel method for determining the Tg of the sample surface at different experimental conditions. Extrapolating the critical RH to lower the Tg to experimental temperature to 0% RH yeilded a Tg similar to literature values. Water sorption data provided valuable information on changes in mobility of the amorphous form as a function of temperature and RH. CONCLUSIONS: It is possible to use IGC to determine the Tg of the surface of particles at defined conditions. This overcomes the problems of conventional methods of assessing Tg, relating to disruption of water sorption on heating. This helps in the understanding of the physical form of the surface of hydrophobic particles and how and when the surface will start to crystallize.
PURPOSE: To measure the glass transition temperature (Tg) at the surface of a hydrophobic particle at different temperatures and humidities, on the hypothesis that the surface may be plasticized to a different extent to the bulk due to slow water sorption giving a concentration gradient of water through the particles. METHODS: Amorphous indomethacin was exposed to a range of relative humidities (RH) and temperatures in an inverse gas chromatograph (IGC). The retention volumes of decane were calculated at all conditions using center of mass (Vcom) and peak height (Vmax) methods. The extent of water sorption was determined gravimetrically. RESULTS: The Vcom retention volumes were found to deviate from Vmax results at certain critical humidities at each temperature. This was taken as a novel method for determining the Tg of the sample surface at different experimental conditions. Extrapolating the critical RH to lower the Tg to experimental temperature to 0% RH yeilded a Tg similar to literature values. Water sorption data provided valuable information on changes in mobility of the amorphous form as a function of temperature and RH. CONCLUSIONS: It is possible to use IGC to determine the Tg of the surface of particles at defined conditions. This overcomes the problems of conventional methods of assessing Tg, relating to disruption of water sorption on heating. This helps in the understanding of the physical form of the surface of hydrophobic particles and how and when the surface will start to crystallize.