Nucleation mode formation in heavy-duty diesel exhaust with and without a particulate filter.

Particle size distribution measurement with direct tailpipe sampling is employed to study the effect of a continuously regenerating diesel particulate filter (CRDPF) on emissions of a heavy-duty diesel engine. The CRDPF consists of an oxidation catalyst and a filter. Tests are conducted using 2 and 40 ppm sulfur content fuels and two steady-state driving modes. The formation of nucleation mode with and without CRDPF is found to depend on different parameters. Without after-treatment, size distribution is observed to have a nucleation mode only at low load. Being independent of the fuel sulfur level (with these low sulfur level fuels), this nucleation mode is suggested to form mainly from hydrocarbons. With a CRDPF-equipped engine, nucleation mode, which was not observed without CRDPF, was found at high load mode only. This nucleation mode formation was found to correlate positively with fuel sulfur content. It is suggested that sulfuric acid is a main nucleating species in this situation, resulting from the effective conversion of SO2 to SO3 in the oxidation catalyst. Using a thermodenuder confirms that the nucleation mode particles are semivolatile in nature.