Simplified procedures for the analysis of polycyclic aromatic hydrocarbons in water, sediments and mussels.

We describe in this paper simple and robust analytical protocols to determine the 16 polycyclic aromatic hydrocarbons (PAHs) of the US Environmental Protection Agency priority list in water, sediment and mussels. For water samples, eight different solid-phase extraction (SPE) sorbents have been compared and among them, C18 provided highest recoveries and limits of detection of 0.3-15 ng/L. For lyophilized sediments, Soxhlet and ultrasonic extraction were compared, and the last one permitted to recover all analytes with highest repetitivity and was validated by analysing a certified reference material. Finally, the analysis of mussels was undertaken using Soxhlet, ultrasonic and pressurized liquid extraction (PLE) and the performance of several clean-up steps are compared. Whereas for the former two, incomplete recovery or losses of some analytes were evidenced, PLE permitted a more efficient extraction and although alkaline digestion was necessary to remove coextracted compounds, the method gave acceptable recoveries and limits of detection of 0.5-7.7 microg/kg dry mass, as for sediments. In all cases, analysis was performed by gas chromatography coupled to mass spectrometry and internal standard quantification was performed using five deuterated PAHs. Each method performance is discussed for the three matrices analysed and the paper reports advantages and disadvantages of each for their routine application in monitoring programs.