Literature DB >> 15374758

Vibration in operating heavy haul trucks in overburden mining.

Shrawan Kumar1.   

Abstract

The objective of this study was to determine if the vibration in sagittal (x), coronal (y) and vertical (z) axes of the seat pan of the heavy haul trucks used in overburden mining, and the vibration experienced by the drivers at the third lumbar and seventh cervical vertebral levels in operating these trucks exceeded the ISO standards, thereby posing threat to safety. A new and an old truck of two different makes and different carrying capacities (200 and 300 series) were instrumented with a triaxial accelerometer on the seat pan. Fourteen drivers (8 male and 6 female) were instrumented with a triaxial accelerometer at C7 and L3 spinous processes. The vibration at the seat pan, C7, and L3 levels were recorded using an onboard computer with PCMCIA card and, compared against the ISO standards. The vertical vibration of the seat pan in the entire sample ranged from a low of .37 m/s2 to a high of 11.73 m/s2. The vibration at the lumbar level in the sample ranged between .34 and 2.72 m/s2. The values for cervical level vertical vibration in the sample ranged between .2 and 2.22 m/s2. The gender of the driver, truck make, and it's carrying capacity did not have a significant effect on the vibration. However, the body weight of the driver, the segment of the truck and the site of measurement revealed significant differences in vibration (p < 0.001). Out of a total 36 combinations (4 trucks x 9 recording locations) the seat pan vertical vibration exceeded the ISO standards 8 times for males and 9 times for females. The lumbar vertebral vertical vibration in males exceeded ISO standards 12 times and in females 11 times. The cervical vertebral vertical vibration exceeded ISO standards once in females only. However, in sagittal and coronal planes the whole body vibration exceeded the ISO standards many times. Heavy haul trucks (240 and 320 ton capacity) frequently generated vibrations in excess of ISO standards in overburden mining operation representing a health hazard.

Entities:  

Mesh:

Year:  2004        PMID: 15374758     DOI: 10.1016/j.apergo.2004.06.009

Source DB:  PubMed          Journal:  Appl Ergon        ISSN: 0003-6870            Impact factor:   3.661


  6 in total

1.  Whole Body Vibration Exposure Transmitted to Drivers of Heavy Equipment Vehicles: A Comparative Case According to the Short- and Long-Term Exposure Assessment Methodologies Defined in ISO 2631-1 and ISO 2631-5.

Authors:  María L de la Hoz-Torres; Antonio J Aguilar; Diego P Ruiz; Mª Dolores Martínez-Aires
Journal:  Int J Environ Res Public Health       Date:  2022-04-25       Impact factor: 4.614

2.  Investigation of human body vibration exposures on haul trucks operating at U.S. surface mines/quarries relative to haul truck activity.

Authors:  Alan G Mayton; William L Porter; Xueyan S Xu; Eric B Weston; Elaine N Rubenstein
Journal:  Int J Ind Ergon       Date:  2018-03       Impact factor: 2.656

3.  Assessment of whole-body vibration exposures and influencing factors for quarry haul truck drivers and loader operators.

Authors:  Alan G Mayton; Christopher C Jobes; Sean Gallagher
Journal:  Int J Heavy Veh Syst       Date:  2014-07       Impact factor: 0.838

4.  Effect of whole-body vibration exposures on physiological stresses: Mining heavy equipment applications.

Authors:  Kiana Kia; Stephanie M Fitch; Sean A Newsom; Jeong Ho Kim
Journal:  Appl Ergon       Date:  2020-02-01       Impact factor: 3.661

5.  Exposure to whole-body vibration in open-cast mines in the Barents region.

Authors:  Lage Burström; Ville Hyvärinen; Magnar Johnsen; Hans Pettersson
Journal:  Int J Circumpolar Health       Date:  2016-02-09       Impact factor: 1.228

6.  Whole-body Vibration Exposure Experienced by Dumper Operators in Opencast Mining According to ISO 2631-1:1997 and ISO 2631-5:2004: A Case Study.

Authors:  Shivkumar Shrinarayan Prajapati; Rahul Anup Mishra; Balram Jhariya; Anand Arun Deshmukh
Journal:  Indian J Occup Environ Med       Date:  2020-08-19
  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.