Literature DB >> 15360276

Biodegradation of aliphatic homopolyesters and aliphatic-aromatic copolyesters by anaerobic microorganisms.

Dunja-Manal Abou-Zeid1, Rolf-Joachim Müller, Wolf-Dieter Deckwer.   

Abstract

The anaerobic degradability of natural and synthetic polyesters is investigated applying microbial consortia (3 sludges, 1 sediment) as well as individual strains isolated for this purpose. In contrast to aerobic conditions, the natural homopolyester polyhydroxybutyrate (PHB) degrades faster than the copolyester poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV). For the synthetic polyester poly(epsilon-caroplacton) (PCL), microbial degradation in the absence of oxygen could be clearly demonstrated; however, the degradation rate is significantly lower than for PHB and PHBV. Other synthetic polyesters such as poly(trimethylene adipate) (SP3/6), poly(tetramethylene adipate) (SP4/6), and aliphatic-aromatic copolyesters from 1,4-butanediol, terephthalic acid, and adipic acid (BTA-copolymers) exhibit only very low anaerobic microbial susceptibility. A copolyester with high amount of terephthalic acid (BTA 40:60) resisted the anaerobic breakdown even under thermophilic conditions and/or when blended with starch. For the synthetic polymers, a number of individual anaerobic strain could be isolated which are able to depolymerize the polymers and selected strains where identified as new species of the genus Clostridium or Propionispora. Their distinguished degradation patterns point to the involvement of different degrading enzymes which are specialized to depolymerize either the natural polyhydroxyalkanoates (e.g., PHB), the synthetic polyester PCL, or other synthetic aliphatic polyesters such as SP3/6. It can be supposed that these enzymes exhibit comparable characteristics as those described to be responsible for aerobic polyester degradation (lipases, cutinases, and PHB-depolymerases).

Entities:  

Mesh:

Substances:

Year:  2004        PMID: 15360276     DOI: 10.1021/bm0499334

Source DB:  PubMed          Journal:  Biomacromolecules        ISSN: 1525-7797            Impact factor:   6.988


  5 in total

1.  Synthesis of Poly(Hexamethylene Succinate-Co-Ethylene Succinate) Copolymers With Different Physical Properties and Enzymatic Hydrolyzability by Regulating the Ratio of Monomer.

Authors:  Menglu Li; Jing Jing; Tingting Su
Journal:  Front Bioeng Biotechnol       Date:  2022-04-28

Review 2.  Poly(lactic acid) (PLA) and polyhydroxyalkanoates (PHAs), green alternatives to petroleum-based plastics: a review.

Authors:  Ahmed Z Naser; I Deiab; Basil M Darras
Journal:  RSC Adv       Date:  2021-05-10       Impact factor: 4.036

3.  Preparation and evaluation of poly (caprolactone fumarate) nanoparticles containing doxorubicin HCI.

Authors:  N Shokri; H Akbari Javar; Sh Fouladdel; A Khalaj; Mr Khoshayand; R Dinarvand; F Atyabi; A Nomani; E Azizi
Journal:  Daru       Date:  2011       Impact factor: 3.117

4.  Degradation of Poly(ε-caprolactone) by thermophilic Streptomyces thermoviolaceus subsp. thermoviolaceus 76T-2.

Authors:  Te-Kuan Chua; Min Tseng; Mei-Kwei Yang
Journal:  AMB Express       Date:  2013-01-29       Impact factor: 3.298

5.  Poly(l-Lactic Acid)-co-poly(Butylene Adipate) New Block Copolymers for the Preparation of Drug-Loaded Long Acting Injectable Microparticles.

Authors:  Vasiliki Karava; Aggeliki Siamidi; Marilena Vlachou; Evi Christodoulou; Nikolaos D Bikiaris; Alexandra Zamboulis; Margaritis Kostoglou; Eleni Gounari; Panagiotis Barmpalexis
Journal:  Pharmaceutics       Date:  2021-06-23       Impact factor: 6.321

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.