Literature DB >> 15348359

Oxidized implants and their influence on the bone response.

Y T Sul1, C B Johansson, Y Jeong, K Röser, A Wennerberg, T Albrektsson.   

Abstract

Surface oxide properties are regarded to be of great importance in establishing successful osseointegration of titanium implants. Despite a large number of theoretical questions on the precise role of oxide properties of titanium implants, current knowledge obtained from in vivo studies is lacking. The present study is designed to address two aspects. The first is to verify whether oxide properties of titanium implants indeed influence the in vivo bone tissue responses. The second, is to investigate what oxide properties underline such bone tissue responses. For these purposes, screw-shaped/turned implants have been prepared by electrochemical oxidation methods, resulting in a wide range of oxide properties in terms of: (i) oxide thickness ranging from 200 to 1000 nm, (ii) the surface morphology of barrier and porous oxide film structures, (iii) micro pore configuration - pore sizes<8 microm by length, about 1.27 microm2 to 2.1 microm2 by area and porosity of about 12.7-24.4%, (iv) the crystal structures of amorphous, anatase and mixtures of anatase and rutile type, (v) the chemical compositions of TiO2 and finally, (vi) surface roughness of 0.96-1.03 microm (Sa). These implant oxide properties were divided into test implant samples of Group II, III, IV and V. Control samples (Group I) were turned commercially pure titanium implants. Quantitative bone tissue responses were evaluated biomechanically by resonance frequency analysis (RFA) and removal torque (RT) test. Quantitative histomorphometric analyses and qualitative enzyme histochemical detection of alkaline (ALP) and acidic phosphatase (ACP) activities were investigated on cut and ground sections after six weeks of implant insertion in rabbit tibia. In essence, from the biomechanical and quantitative histomorphometric measurements we concluded that oxide properties of titanium implants, i.e. the oxide thickness, the microporous structure, and the crystallinity significantly influence the bone tissue response. At this stage, however, it is not clear whether oxide properties influence the bone tissue response separately or synergistically. Copyright 2001 Kluwer Academic Publishers

Entities:  

Year:  2001        PMID: 15348359     DOI: 10.1023/a:1012837905910

Source DB:  PubMed          Journal:  J Mater Sci Mater Med        ISSN: 0957-4530            Impact factor:   3.896


  18 in total

1.  Load bearing capacity of bone anchored fiber-reinforced composite device.

Authors:  Ahmed Mansour Ballo; Lippo V Lassila; Pekka K Vallittu; Timo O Närhi
Journal:  J Mater Sci Mater Med       Date:  2007-06-09       Impact factor: 3.896

2.  Enhancing osseointegration of titanium implants through large-grit sandblasting combined with micro-arc oxidation surface modification.

Authors:  Wulin He; Xing Yin; Li Xie; Zeping Liu; Jingtao Li; Shujuan Zou; Jianwei Chen
Journal:  J Mater Sci Mater Med       Date:  2019-06-11       Impact factor: 3.896

3.  Improved tribo-mechanical behavior of CaP-containing TiO2 layers produced on titanium by shot blasting and micro-arc oxidation.

Authors:  Eduardo M Szesz; Gelson B de Souza; Gabriel G de Lima; Bruno A da Silva; Neide K Kuromoto; Carlos M Lepienski
Journal:  J Mater Sci Mater Med       Date:  2014-05-21       Impact factor: 3.896

4.  Does thread design influence relative bone-to-implant contact rate of palatal implants?

Authors:  Britta A Jung; Martin Kunkel; Peter Göllner; Thomas Liechti; Maximilian Moergel; Robert Noelken; Peter Borbély; Heinrich Wehrbein
Journal:  J Orofac Orthop       Date:  2011-07-10       Impact factor: 1.938

5.  Biodistribution of titanium dioxide from biologic compartments.

Authors:  Daniel G Olmedo; Deborah R Tasat; María Beatriz Guglielmotti; Rómulo Luis Cabrini
Journal:  J Mater Sci Mater Med       Date:  2008-04-04       Impact factor: 3.896

6.  Electrochemical growth behavior, surface properties, and enhanced in vivo bone response of TiO2 nanotubes on microstructured surfaces of blasted, screw-shaped titanium implants.

Authors:  Young-Taeg Sul
Journal:  Int J Nanomedicine       Date:  2010-04-15

7.  In vivo and in vitro response to electrochemically anodized Ti-6Al-4V alloy.

Authors:  Yu Mi Lee; Eun Jung Lee; Sung Tae Yee; Byung Il Kim; Eun Sang Choe; Hyun Wook Cho
Journal:  J Mater Sci Mater Med       Date:  2007-10-04       Impact factor: 3.896

8.  Spark anodization of titanium-zirconium alloy: surface characterization and bioactivity assessment.

Authors:  Ajay Sharma; A James McQuillan; Lavanya A Sharma; John Neil Waddell; Yo Shibata; Warwick John Duncan
Journal:  J Mater Sci Mater Med       Date:  2015-08-11       Impact factor: 3.896

Review 9.  Dental implant systems.

Authors:  Yoshiki Oshida; Elif B Tuna; Oya Aktören; Koray Gençay
Journal:  Int J Mol Sci       Date:  2010-04-12       Impact factor: 5.923

10.  Microscopic Characterization of Bioactivate Implant Surfaces: Increasing Wettability Using Salts and Dry Technology.

Authors:  Francesco Gianfreda; Donato Antonacci; Carlo Raffone; Maurizio Muzzi; Valeria Pistilli; Patrizio Bollero
Journal:  Materials (Basel)       Date:  2021-05-17       Impact factor: 3.623

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.