Literature DB >> 15348133

No biological advantage with a low temperature curing versus a conventional bone cement: an experimental, mechanical and histomorphometrical study in the rabbit tibia.

P Morberg1, C B Johansson, H Malchau.   

Abstract

Both tibial marrow cavities of 12 rabbits were evacuated and filled with curing bone cement. In one of the tibias conventional curing bone cement (Simplex P) was injected, while the other tibia of the same animal was filled with a low temperature curing bone cement (Boneloc). Three titanium implants were inserted along the proximal metaphysis of each tibia. Eight weeks after insertion the most distal implant in each tibia was removed while recording the removal torque. The implant was then once again screwed home into its bone bed. The animals were sacrificed 16 weeks after implant insertion. The previously removed implant and another implant in each tibia were then both removed while recording the removal torque. The third implant in each tibia was cut out en bloc with surrounding tissue and processed for ground section. We found no statistical differences in the mechanical or the histomorphometric evaluation of implant integration between the two cements, indicating that the low temperature curing bone cement does not result in a significantly different bone response from that of a conventional acrylic cement. Copyright 1999 Kluwer Academic Publishers

Entities:  

Year:  1999        PMID: 15348133     DOI: 10.1023/a:1026417506030

Source DB:  PubMed          Journal:  J Mater Sci Mater Med        ISSN: 0957-4530            Impact factor:   3.896


  16 in total

1.  Cement interface temperature in hip arthroplasty.

Authors:  S Toksvig-Larsen; H Franzen; L Ryd
Journal:  Acta Orthop Scand       Date:  1991-04

2.  Low polymerization temperature with Boneloc. In vivo measurements in 11 hip replacements.

Authors:  A G Wykman; G A Sandersjöö
Journal:  Acta Orthop Scand       Date:  1995-06

3.  Early failure with Boneloc bone cement. 4/8 femoral stems loose within 3 years.

Authors:  S Suominen
Journal:  Acta Orthop Scand       Date:  1995-02

4.  A method for the study of undecalcified bones and teeth with attached soft tissues. The Säge-Schliff (sawing and grinding) technique.

Authors:  K Donath; G Breuner
Journal:  J Oral Pathol       Date:  1982-08

5.  Innovations in acrylic bone cement and application equipment.

Authors:  T Kindt-Larsen; D B Smith; J S Jensen
Journal:  J Appl Biomater       Date:  1995

6.  Depressive effects of acrylic cement components on bone metabolism. Isotope release and phosphatase production studied in vitro.

Authors:  J G Pedersen; B Lund; I Reimann
Journal:  Acta Orthop Scand       Date:  1983-12

7.  Blood perfusion and remodelling activity in canine tibial diaphysis after filling with a new bone cement compared to bone wax and poly(methyl methacrylate) cement.

Authors:  J Stürup; L Nimb; J S Jensen
Journal:  Biomaterials       Date:  1995-07       Impact factor: 12.479

8.  Effects of polymerization heat and monomers from acrylic cement on canine bone.

Authors:  J Stürup; L Nimb; M Kramhøft; J S Jensen
Journal:  Acta Orthop Scand       Date:  1994-02

9.  Improved cortical histology after cementation with a new MMA-DMA-IBMA bone cement: an animal study.

Authors:  L Nimb; J Stürup; J S Jensen
Journal:  J Biomed Mater Res       Date:  1993-05

10.  Total hip arthroplasty with Boneloc: loosening in 102/157 cases after 0.5-3 years.

Authors:  A R Nilsen; M Wiig
Journal:  Acta Orthop Scand       Date:  1996-02
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.