Literature DB >> 15338596

Carbon-carbon composite bearing materials in hip arthroplasty: analysis of wear and biological response to wear debris.

G I Howling1, E Ingham, H Sakoda, T D Stewart, J Fisher, A Antonarulrajah, S Appleyard, B Rand.   

Abstract

Ultra-high molecular weight polyethylene wear particles have been implicated as the major cause of osteolysis, implant loosening and late aseptic failure in total hip arthroplasties in vivo. This study initially screened 22 carbon-carbon composite materials as alternatives for UHMWPE in joint bearings. New bearing materials should satisfy certain criteria--they should have good wear properties that at least match UHMWPE, and produce wear particles with low levels of cytotoxic and osteolytic activity. Initial screening was based on wear resistance determined in short-term tribological pin-on-plate tests. Three materials (HMU-PP(s), HMU-RC-P(s), and SMS-RC-P(s)) which had superior wear resistance were selected for long-term testing. All materials had very low wear factors and SMS-RC-P(s), which had a wear factor of 0.08 +/- 0.56 x 10(-7) mm3/Nm, was selected for the subsequent biological testing and particle size analysis. SMS-RC-P(s) showed good biocompatibility in bulk material form and also the wear particles had low cytotoxicity for L929 fibroblasts in culture compared to metal wear particles. Wear debris size analysis by transmission electron microscopy showed that the particles were very small, with the vast majority being under 100 nm in size, similar to metal wear particles. The potential osteolytic effect of SMS-RC-P(s) wear particles was investigated by culturing particles with human peripheral blood mononuclear cells and measuring TNFalpha production. SMS-RC-P(s) did not significantly stimulate TNFalpha production at a particle volume to cell number ratio of 80:1, indicating that the debris had a low osteolytic potential. The results of this study suggest that carbon-carbon composites, particularly those composed of PAN-based fibers may be important biomaterials in the development of next generation bearing surfaces for use in total joint replacements that have very low wear rates and reduced osteolytic and cytotoxic potential.

Entities:  

Mesh:

Substances:

Year:  2004        PMID: 15338596     DOI: 10.1023/b:jmsm.0000010102.26218.d1

Source DB:  PubMed          Journal:  J Mater Sci Mater Med        ISSN: 0957-4530            Impact factor:   3.896


  22 in total

Review 1.  Biological reactions to wear debris in total joint replacement.

Authors:  E Ingham; J Fisher
Journal:  Proc Inst Mech Eng H       Date:  2000       Impact factor: 1.617

2.  Quantitative analysis of wear and wear debris from metal-on-metal hip prostheses tested in a physiological hip joint simulator.

Authors:  P J Firkins; J L Tipper; M R Saadatzadeh; E Ingham; M H Stone; R Farrar; J Fisher
Journal:  Biomed Mater Eng       Date:  2001       Impact factor: 1.300

3.  Macrophages stimulate bone resorption when they phagocytose particles.

Authors:  D W Murray; N Rushton
Journal:  J Bone Joint Surg Br       Date:  1990-11

4.  Composition and morphology of wear debris in failed uncemented total hip replacement.

Authors:  A S Shanbhag; J J Jacobs; T T Glant; J L Gilbert; J Black; J O Galante
Journal:  J Bone Joint Surg Br       Date:  1994-01

5.  Tissue reaction to metal on metal total hip prostheses.

Authors:  P F Doorn; J M Mirra; P A Campbell; H C Amstutz
Journal:  Clin Orthop Relat Res       Date:  1996-08       Impact factor: 4.176

6.  Prosthetic metals interfere with the functions of human osteoblast cells in vitro.

Authors:  J Y Wang; B H Wicklund; R B Gustilo; D T Tsukayama
Journal:  Clin Orthop Relat Res       Date:  1997-06       Impact factor: 4.176

7.  A study on the effects of particulate metals of orthopaedic interest on murine macrophages in vitro.

Authors:  T Rae
Journal:  J Bone Joint Surg Br       Date:  1975-11

8.  Comparison of the response of primary human peripheral blood mononuclear phagocytes from different donors to challenge with model polyethylene particles of known size and dose.

Authors:  J B Matthews; T R Green; M H Stone; B M Wroblewski; J Fisher; E Ingham
Journal:  Biomaterials       Date:  2000-10       Impact factor: 12.479

9.  Polyethylene particles of a 'critical size' are necessary for the induction of cytokines by macrophages in vitro.

Authors:  T R Green; J Fisher; M Stone; B M Wroblewski; E Ingham
Journal:  Biomaterials       Date:  1998-12       Impact factor: 12.479

Review 10.  Mechanism and clinical significance of wear debris-induced osteolysis.

Authors:  H C Amstutz; P Campbell; N Kossovsky; I C Clarke
Journal:  Clin Orthop Relat Res       Date:  1992-03       Impact factor: 4.176

View more
  3 in total

1.  Debris of carbon-fibers originated from a CFRP (pEEK) wrist-plate triggered a destruent synovitis in human.

Authors:  Antonio Merolli; Lorenzo Rocchi; Marco De Spirito; Francesco Federico; Alessandro Morini; Luigi Mingarelli; Francesco Fanfani
Journal:  J Mater Sci Mater Med       Date:  2016-01-12       Impact factor: 3.896

Review 2.  Wear Debris Characterization and Corresponding Biological Response: Artificial Hip and Knee Joints.

Authors:  Md J Nine; Dipankar Choudhury; Ay Ching Hee; Rajshree Mootanah; Noor Azuan Abu Osman
Journal:  Materials (Basel)       Date:  2014-02-10       Impact factor: 3.623

3.  Significance of nano- and microtopography for cell-surface interactions in orthopaedic implants.

Authors:  M Jäger; C Zilkens; K Zanger; R Krauspe
Journal:  J Biomed Biotechnol       Date:  2007
  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.