Adsorption-desorption characteristics of lead in variable charge soils.

Adsorption desorption processes of Pb at contaminated levels in two variable charge soils were investigated. The red soil (RAR) developed on the Arenaceous rock (clayey, mixed siliceous thermic typic Dystrochrept) adsorbed more Pb2+ than the red soil (REQ) derived from the Quaternary red earths (clayey, kaolinitic thermic plinthite Aquult). The maximum adsorption values (Xm) that were obtained from the simple Langmuir model were 52.6 mmol Pb2+ kg(-1) soil and 29.9 mmol Pb2+ kg(-1) soil, respectively, for the RAR and REQ. Adsorption of Pb2+ decreased soil pH by 1.10 unit for the RAR soil and 1.21 unit for the REQ soil at the highest loading. The adsorption equilibrium pH of RAR was higher than that of REQ at the same Pb2+ concentration. The distribution coefficient (Kd) of Pb in the soils decreased exponentially with increasing Pb2+ loading. Most of the adsorbed Pb2+ in the soils was not desorbed in the 0.01 mol L(-1) NaNO3 solution. After five successive extractions with NaNO3, only 0-11% of the total adsorbed Pb2+ in the RAR soil was desorbed and the corresponding value of the REQ soil was 0-19%, indicating that the RAR soil had a greater affinity for Pb2+ than the REQ soil at the same Pb2+ loading. Different mechanisms might be involved in Pb2+ adsorption/desorption at different levels of Pb2+ loading and between the two soils.