Literature DB >> 1532907

The effect of adhesive type and thickness on bond strength of orthodontic brackets.

F Mackay1.   

Abstract

Fine-mesh based brackets were bonded to plastic cylinders using four different adhesives. Adhesive thickness was controlled using a bonding jig. The bond was then tested to failure using a shear force. Each adhesive had its own minimum thickness, probably related to its viscosity. Increasing the thickness of the adhesiveness to 0.26 mm, using a stainless steel spacer had minimal effect on their mean shear bond strength.

Mesh：

Substances：

Year:  1992        PMID： 1532907     DOI： 10.1179/bjo.19.1.35

Source DB:  PubMed          Journal:  Br J Orthod        ISSN： 0301-228X


  3 in total

1.  Effects of contact compressive force on bracket bond strength and adhesive thickness : Study using orthodontic resins with different viscosities.

Authors:  Sho Goto; Yuh Hasegawa; Yukio Miyagawa; Toshiya Endo
Journal:  J Orofac Orthop       Date:  2019-12-18       Impact factor: 1.938

2.  The effect of different force magnitudes for placement of orthodontic brackets on shear bond strength, in three adhesive systems.

Authors:  Amir Mohammadi; Sohrab Pourkhameneh; Amir-Houman Sadrhaghighi
Journal:  J Clin Exp Dent       Date:  2018-06-01

3.  Effects of surface treatment and artificial aging on the shear bond strength of orthodontic brackets bonded to four different provisional restorations.

Authors:  Youssef S Al Jabbari; Sara M Al Taweel; Mohammed Al Rifaiy; Mohammed Q Alqahtani; Theodoros Koutsoukis; Spiros Zinelis
Journal:  Angle Orthod       Date:  2014-01-21       Impact factor: 2.079
  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.