Literature DB >> 15276051

Silylation and surface properties of chemically grafted hydrophobic silica.

M C Capel-Sanchez1, L Barrio, J M Campos-Martin, J L G Fierro.   

Abstract

A commercial mesoporous silica (Grace Davison) was chemically grafted with trimethylsilyl chloride (TMSCl) and hexamethyldisilanaze (HMDS). The silylation process brought about some reduction in the specific BET area, the pore volume, and the pore sizes of the samples. Thermogravimetric studies of the silylated samples revealed that the grafting process is kinetically controlled at short reaction times. In the kinetic regime, increasing concentrations of the silylant agent up to 2 wt% in the solvent led to an increase of the extent of the silylated surface, although this limitation disappeared at higher concentrations. Silylation was confirmed by diffuse reflectance infrared Fourier transform (DRIFTS), (29)Si CP-MAS NMR, and photoelectron (XPS) spectroscopic techniques. Solid-state (29)Si MAS-NMR spectra of the silylated samples revealed the presence of -SiCH(3) groups (9.5 ppm) together with two resonances, Q3 (approximately equal to -104 ppm) and Q4 (approximately equal to -114 ppm), coming from siloxane [Qn approximately Si(OSi)n(OH)(4-n), n approximately 2-4] groups, the Q3 signal decreasing upon silylation. The DRIFT spectra of the silylated samples exhibited two well defined bands at 2970 and 2907 cm(-1), due to stretching vibration modes of the C-H bonds in surface -CH(3) groups formed during the silylation process, and also the disappearance of the band at 3740 cm(-1). This observation indicates the complete removal of terminal and geminal hydroxyl groups by grafting with the silylating agent. Similarly, high-resolution photoelectron spectra of the Si2p core levels showed a high binding-energy component (103.5 eV) in all the samples, coming from the Si coordinated with oxide anions in SiO(2), together with a second component at 102.1 eV, which is the fingerprint of Si coordinated by oxide anions and an organic group. Finally, the samples were ranked according to their hydrophobicity, as determined from the temperature-programmed desorption profiles of adsorbed water and 2-methylbutane.

Entities:  

Mesh:

Substances:

Year:  2004        PMID: 15276051     DOI: 10.1016/j.jcis.2004.04.055

Source DB:  PubMed          Journal:  J Colloid Interface Sci        ISSN: 0021-9797            Impact factor:   8.128


  4 in total

Review 1.  Engineering mesoporous silica nanoparticles for drug delivery: where are we after two decades?

Authors:  María Vallet-Regí; Ferdi Schüth; Daniel Lozano; Montserrat Colilla; Miguel Manzano
Journal:  Chem Soc Rev       Date:  2022-07-04       Impact factor: 60.615

2.  Utilization of rice husk silica as adsorbent for BTEX passive air sampler under high humidity condition.

Authors:  Thanita Areerob; Nurak Grisdanurak; Siriluk Chiarakorn
Journal:  Environ Sci Pollut Res Int       Date:  2015-11-14       Impact factor: 4.223

Review 3.  Nanopipette exploring nanoworld.

Authors:  Tomohide Takami; Bae Ho Park; Tomoji Kawai
Journal:  Nano Converg       Date:  2014-04-25

4.  Preparation of Nanocomposite Polymer Electrolyte via In Situ Synthesis of SiO2 Nanoparticles in PEO.

Authors:  Xinjie Tan; Yongmin Wu; Weiping Tang; Shufeng Song; Jianyao Yao; Zhaoyin Wen; Li Lu; Serguei V Savilov; Ning Hu; Janina Molenda
Journal:  Nanomaterials (Basel)       Date:  2020-01-16       Impact factor: 5.076

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.