How much saliva is enough for avoidance of xerostomia?

Xerostomia, the subjective sensation of dry mouth, occurs when the salivary flow rate is less than the rate of fluid loss from the mouth by evaporation and by absorption of water through the oral mucosa. Evaporation can only occur during mouth-breathing but could reach a maximum rate of about 0.21 ml/min at rest, although normally it would be much less. Water absorption through the mucosa can occur because saliva has one sixth the osmotic pressure of extracellular fluid, thus creating a water gradient across the mucosa. The maximum absorption rate is calculated to be about 0.19 ml/min, declining to zero as the saliva reaches isotonicity. A recent study found the residual saliva volume, the volume of saliva left in the mouth after swallowing, to be 71% of normal in patients with severe hyposalivation and whose mouths felt very dry. Saliva in the residual volume is present as a thin film which varies in thickness with site. The hard palate has the thinnest film and when this is <10 microm thick, evaporation during mouth-breathing and/or fluid absorption may rapidly decrease it to zero, resulting in xerostomia. This is also generally associated with reduced secretion from the soft palate minor glands, which may contribute to the film on the hard palate. Thus, xerostomia appears to be due, not to a complete absence of oral fluid, but to localized areas of mucosal dryness, notably in the palate. Unstimulated salivary flow rates >0.1-0.3 ml/min may be necessary for this condition to be avoided. Copyright 2004 S. Karger AG, Basel