Literature DB >> 15119879

A 10-year prospective evaluation of CAD/CAM-manufactured (Cerec) ceramic inlays cemented with a chemically cured or dual-cured resin composite.

Göran Sjögren1, Margareta Molin, Jan W V van Dijken.   

Abstract

PURPOSE: The present follow-up study was carried out to evaluate the performance of Class II Cerec inlays after 10 years of clinical service.
MATERIALS AND METHODS: Sixty-six Class II CAD/CAM ceramic inlays were placed in 27 patients. Each patient received at least one inlay luted with a dual-cured resin composite and one inlay luted with a chemically cured resin composite. At the 10-year recall, 25 (93%) patients with 61 (92%) inlays were available for evaluation using a slight modification of the USPHS criteria.
RESULTS: Fifty-four (89%) of the 61 inlays reevaluated still functioned well at the 10-year recall. During the follow-up period, seven (11%) of the inlays required replacement because of: four inlay fractures, one cusp fracture, endodontic problems in one case, and postoperative symptoms in one case. All the replaced inlays had been luted with the dual-cured resin composite. The fractured inlays were all placed in molars. The estimated survival rate after 10 years was 89%, 77% for the dual-cured resin composite-luted inlays and 100% for the chemically cured resin composite-luted ones. The difference was statistically significant.
CONCLUSION: Patient satisfaction with and acceptance of the Cerec inlays were high, and the performance after 10 years of clinical service was acceptable, especially regarding the inlays luted with the chemically cured resin composite. The properties of the luting agents seem to affect the longevity of the type of ceramic inlays evaluated.

Entities:  

Mesh:

Substances:

Year:  2004        PMID: 15119879

Source DB:  PubMed          Journal:  Int J Prosthodont        ISSN: 0893-2174            Impact factor:   1.681


  25 in total

1.  Effect of proximal box elevation with resin composite on marginal quality of ceramic inlays in vitro.

Authors:  Roland Frankenberger; Julia Hehn; Jan Hajtó; Norbert Krämer; Michael Naumann; Andreas Koch; Matthias J Roggendorf
Journal:  Clin Oral Investig       Date:  2012-02-23       Impact factor: 3.573

Review 2.  Recent advances in materials for all-ceramic restorations.

Authors:  Jason A Griggs
Journal:  Dent Clin North Am       Date:  2007-07

3.  In vitro evaluation of marginal and internal adaptation of class II CAD/CAM ceramic restorations with different resinous bases and interface treatments.

Authors:  María José Sandoval; Giovanni Tommaso Rocca; Ivo Krejci; Michael Mandikos; Didier Dietschi
Journal:  Clin Oral Investig       Date:  2015-04-16       Impact factor: 3.573

4.  CEREC CAD/CAM Chairside System.

Authors:  G Sannino; F Germano; L Arcuri; E Bigelli; C Arcuri; A Barlattani
Journal:  Oral Implantol (Rome)       Date:  2015-04-13

5.  Two-year clinical performance of cast gold vs ceramic partial crowns.

Authors:  Marianne Federlin; Tobias Männer; Karl-Anton Hiller; Sebastian Schmidt; Gottfried Schmalz
Journal:  Clin Oral Investig       Date:  2006-04-14       Impact factor: 3.573

Review 6.  Clinical outcome of bonded partial indirect posterior restorations on vital and non-vital teeth: a systematic review and meta-analysis.

Authors:  Mario Dioguardi; Mario Alovisi; Giuseppe Troiano; Carlo Vito Alberto Caponio; Andrea Baldi; Giovanni Tommaso Rocca; Allegra Comba; Lorenzo Lo Muzio; Nicola Scotti
Journal:  Clin Oral Investig       Date:  2021-10-10       Impact factor: 3.573

7.  Effects of curing mode of resin cements on the bond strength of a titanium post: An intraradicular study.

Authors:  Fazal Reza; Siau Peng Lim
Journal:  J Conserv Dent       Date:  2012-04

Review 8.  Correlation between clinical performance and degree of conversion of resin cements: a literature review.

Authors:  Grace De Souza; Roberto Ruggiero Braga; Paulo Francisco Cesar; Guilherme Carpena Lopes
Journal:  J Appl Oral Sci       Date:  2015 Jul-Aug       Impact factor: 2.698

Review 9.  Assessment of Chair-side Computer-Aided Design and Computer-Aided Manufacturing Restorations: A Review of the Literature.

Authors:  Kusai Baroudi; Shukran Nasser Ibraheem
Journal:  J Int Oral Health       Date:  2015-04

10.  Considerations for ceramic inlays in posterior teeth: a review.

Authors:  Christa D Hopp; Martin F Land
Journal:  Clin Cosmet Investig Dent       Date:  2013-04-18
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.