Influence of fluorapatite on the properties of thermally sprayed hydroxyapatite coatings.

Thermally sprayed hydroxyapatite has been the widely used on orthopaedic prosthesis to induce bone growth and facilitate bone attachment. However, hydroxyapatite has a greater affinity for the formation of an amorphous phase in the thermally sprayed coating that results in the release of excessive amount of mineral ions from the implant coating leading to a saturated environment in the immediate vicinity of the bone cells. Fluorapatite however is highly crystalline and offers the potential for lower mineral ion release by dissolution. Thus study investigates the influence of fluorapatite in a thermally sprayed hydroxyapatite coating. Mechanical blends of fluorapatite with hydroxyapatite were thermally sprayed, characterized with X-ray diffraction, SEM, FTIR, optical microscopy for microstructure, roughness and tested for solubility. Cathodoluminescence microscopy was used to examine the resorbed coating surface. Fluorapatite coatings crystallized more readily and produce a greater coating roughness. The roughness in fluorapatite coatings arises from less flattened droplets that show a tendency for finger formation. Addition of fluorapatite increases coating crystallinity. The use of slower resorbing fluorapatite produces less particle release which favors improved osseointegration. Less change in the surface topography during resorption can be used to an advantage to control the coating surface presented to cells and extra cellular matrix proteins.