Literature DB >> 14602386

Establishment of new preparation method for solid dispersion formulation of tacrolimus.

Kazunari Yamashita1, Toshiomi Nakate, Kazuto Okimoto, Atsuo Ohike, Yuji Tokunaga, Rinta Ibuki, Kazutaka Higaki, Toshikiro Kimura.   

Abstract

The aim of this study was to establish a new preparation method for solid dispersion formulation (SDF) of tacrolimus, a poorly water-soluble drug, without dichloromethane, because no use of dichloromethane is recommended by ICH harmonized tripartite guideline. To select the appropriate carrier, three different SDFs with polyethylene glycol 6000 (PEG 6000), polyvinylpyrrolidone (PVP) and hydroxypropylmethylcellulose (HPMC) were prepared by the conventional solvent method, in which tacrolimus and the carrier were completely dissolved in the mixture of dichloromethane and ethanol. Powder X-ray diffraction (XRD) and differential scanning calorimetry (DSC) patterns indicated that tacrolimus exists in an amorphous state in all three SDFs. The supersaturated dissolution profiles of tacrolimus were observed in all SDFs, and the highest level of supersaturation for tacrolimus was obtained and maintained for 24h from SDF with HPMC. On the other hand, the supersaturated level from SDF with PEG 6000 or PVP decreased rapidly. The in vivo oral absorption study in dogs showed that bioavailability of tacrolimus from SDF with HPMC was remarkably improved compared with the crystalline powder. It was clarified that HPMC is the most appropriate carrier for SDF of tacrolimus. Then, SDF of tacrolimus was prepared by the new method, which allows us to make SDF of tacrolimus by swelling HPMC with ethanol, in which tacrolimus was completely dissolved. This new method does not need dichloromethane. The physicochemical properties of SDF with HPMC prepared by the new method were the same as those of SDF prepared by the conventional solvent method. Furthermore, SDF with HPMC prepared by the new method was still stable after stored at 40 degrees C for 3 months. The pharmacokinetic parameters after oral administration in monkeys showed no significant difference (P>0.01) between SDFs with HPMC prepared by the two methods. In conclusion, we have established the new preparation method for SDF of tacrolimus with HPMC and the new method makes it possible to prepare SDF of tacroliumus without dichloromethane.

Entities:  

Mesh:

Substances:

Year:  2003        PMID: 14602386     DOI: 10.1016/j.ijpharm.2003.07.010

Source DB:  PubMed          Journal:  Int J Pharm        ISSN: 0378-5173            Impact factor:   5.875


  33 in total

1.  Enhancement of dissolution profile by solid dispersion (kneading) technique.

Authors:  Aftab Modi; Pralhad Tayade
Journal:  AAPS PharmSciTech       Date:  2006-08-18       Impact factor: 3.246

2.  Monitoring ibuprofen release from multiparticulates: in situ fiber-optic technique versus the HPLC method: a technical note.

Authors:  Vishal Bijlani; Domotiere Yuonayel; Sabitha Katpally; Beatrice Nkem Chukwumezie; Moji Christianah Adeyeye
Journal:  AAPS PharmSciTech       Date:  2007-07-06       Impact factor: 3.246

3.  Flocculated amorphous nanoparticles for highly supersaturated solutions.

Authors:  Michal E Matteucci; Joseph C Paguio; Maria A Miller; Robert O Williams Iii; Keith P Johnston
Journal:  Pharm Res       Date:  2008-08-15       Impact factor: 4.200

4.  Physicochemical properties of solid dispersions of gliclazide in polyvinylpyrrolidone K90.

Authors:  S Biswal; J Sahoo; P N Murthy
Journal:  AAPS PharmSciTech       Date:  2009-03-25       Impact factor: 3.246

5.  Novel gastroretentive sustained-release tablet of tacrolimus based on self-microemulsifying mixture: in vitro evaluation and in vivo bioavailability test.

Authors:  Yan-ping Wang; Yong Gan; Xin-xin Zhang
Journal:  Acta Pharmacol Sin       Date:  2011-09-19       Impact factor: 6.150

6.  Improving solubility and oral bioavailability of a novel antimalarial prodrug: comparing spray-dried dispersions with self-emulsifying drug delivery systems.

Authors:  Suresh Potharaju; Shravan Kumar Mutyam; Mingtao Liu; Carol Green; Lisa Frueh; Aaron Nilsen; Sovitj Pou; Rolf Winter; Michael K Riscoe; Gita Shankar
Journal:  Pharm Dev Technol       Date:  2020-02-12       Impact factor: 3.133

7.  Matrix tablets: the effect of hydroxypropyl methylcellulose/anhydrous dibasic calcium phosphate ratio on the release rate of a water-soluble drug through the gastrointestinal tract I. In vitro tests.

Authors:  Pseidy L Mamani; Roberto Ruiz-Caro; María D Veiga
Journal:  AAPS PharmSciTech       Date:  2012-08-21       Impact factor: 3.246

8.  Solid dispersions of the penta-ethyl ester prodrug of diethylenetriaminepentaacetic acid (DTPA): formulation design and optimization studies.

Authors:  Yu-Tsai Yang; Anthony J Di Pasqua; Yong Zhang; Katsuhiko Sueda; Michael Jay
Journal:  Pharm Dev Technol       Date:  2013-09-19       Impact factor: 3.133

9.  Enhancement of dissolution rate of gliclazide using solid dispersions with polyethylene glycol 6000.

Authors:  S Biswal; J Sahoo; P N Murthy; R P Giradkar; J G Avari
Journal:  AAPS PharmSciTech       Date:  2008-05-06       Impact factor: 3.246

10.  Design and evaluation of self-microemulsifying drug delivery system (SMEDDS) of tacrolimus.

Authors:  Vivek Borhade; Hema Nair; Darshana Hegde
Journal:  AAPS PharmSciTech       Date:  2008-01-04       Impact factor: 3.246

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.