Preliminary exploration of the relationships between soil characteristics and PAH desorption and biodegradation.

Desorption and biodegradation of pyrene (PYR) were investigated and their relationships to soil characteristics were addressed. The results indicated that maximum achievable desorption was 30.2, 10.4, and 1.0 mg/kg for soils that had 1.7, 2.2, and 4.4 wt.% of expandable clays (smectite and vermiculite), respectively. Neither dissolved organic matter (DOM) nor total clay amounts made a good prediction of the desorption trend. Subsequently, the ease of desorption facilitated a faster aqueous biodegradation rate. The slowest aqueous biodegradation rate, 0.02 l/h, was achieved for the soil system that had the greatest amount of expandable clays, whereas the soil containing 1.7% expandable clays only achieved 0.73 l/h. The soil with 2.2% expandable clays depicted 0.41 l/h of aqueous biodegradation rate. A good linear correlation was obtained between maximum achievable desorption and aqueous biodegradation rate (R(2)=0.92). Soil analysis revealed that the total (soil+water) biodegradation reached was 65%, 78.3%, and 81.8% of the initial concentration (100 mg/kg) for the sandy clay loam (Colombian), sandy loam (Ohio), and silty loam (New Mexico) soils, respectively. This biodegradation extent was also in good agreement of expandable clay amount. Although aqueous PYR bioavailability was limited due to the strong association with the expandable clays, microbial movement and adhesion to those clays seemed to result in a great extent of the soil-phase biodegradation.