Linkage guide for rotational alignment during total knee arthroplasty.

A linkage guide was devised for use in conjunction with knee arthroplasty instruments to achieve proper component rotation. The femoral component was rotationally aligned to the surgical epicondylar axis using one guide. The other guides were used after all bone surfaces were cut and soft tissue balancing was completed. A Kirschner wire was guided into the proximal tibial aspect parallel to the sagittal plane of the femoral component with the patella in its normal position and the knee in full extension. The wire was used as a reference to determine tibial component rotation. The relative rotational alignment of 21 knees in 19 patients who had undergone cruciate-retaining total knee arthroplasty utilizing this guide was assessed using the modified Eckhoff method. The results of radiographic analysis were compared with those in a control group of 25 knees where the guide was not employed. The external rotation of the femoral component relative to the tibial component was 1.3 degrees +/- 2.0 degrees (mean +/- SD) in the guided group and 1.1 degrees +/- 4.4 degrees in the control group. The relative rotational angle was significantly more consistent using the guide. Implant malrotation can be reduced using our technique.