Literature DB >> 12970222

Introduction of a flexible polymeric heart valve prosthesis with special design for mitral position.

Sabine H Daebritz1, Jörg S Sachweh, Benita Hermanns, Bernd Fausten, Andreas Franke, Jan Groetzner, Bernd Klosterhalfen, Bruno J Messmer.   

Abstract

BACKGROUND: Current heart valve prostheses are constructed mimicking the native aortic valve. Special hemodynamic characteristics of the mitral valve such as a nonaxial central inflow with creation of a left ventricular vortex have so far not been taken into account. A new polycarbonaturethane (PCU) bileaflet heart valve prosthesis with special design for the mitral position is introduced, and results of animal testing are presented. METHODS AND
RESULTS: After in vitro testing, 7 PCU-prostheses and 7 commercial bioprostheses (Perimount, n=4; Mosaic, n=3) were implanted in mitral position into growing Jersey calves (age 3-5 months, weight 60-97 kg) for 20 weeks. 2-Dimensional echocardiography was performed after implantation and before sacrification. Autopsy included histologic, radiographic, and electron microscopic examination of the valves. In vitro durability was proven for >15 years. After implantation 2-dimensional-echocardiography showed no relevant gradient or regurgitation of any prosthesis. Clinical course of the animals with PCU valves was excellent. In contrast, 5 of 7 calves with bioprostheses were sacrificed after 1-9 weeks because of congestive heart failure. 2-Dimensional echocardiography of the PCU valves after 20 weeks showed mild leaflet thickening with trivial regurgitation; mean gradient was 8.1+/-5.0 mm Hg (weight: 160-170 kg). The explanted PCU prostheses revealed mild calcification and no structural degeneration. All of the Perimount bioprostheses were severely calcified and degenerated after 11+/-7 weeks. One Mosaic bioprosthesis was thrombosed after 1 week, and 2 showed severe and mild-to-moderate degeneration after 4 and 22 weeks, respectively.
CONCLUSIONS: Polycarbonaturethane valve prostheses with special design for mitral position show excellent hemodynamic performance and durability in vivo. Calcification and structural changes are mild compared with bioprostheses. Controlled clinical studies are planned.

Entities:  

Mesh:

Substances:

Year:  2003        PMID: 12970222     DOI: 10.1161/01.cir.0000087655.41288.dc

Source DB:  PubMed          Journal:  Circulation        ISSN: 0009-7322            Impact factor:   29.690


  5 in total

1.  TexMi: development of tissue-engineered textile-reinforced mitral valve prosthesis.

Authors:  Ricardo Moreira; Valentine N Gesche; Luis G Hurtado-Aguilar; Thomas Schmitz-Rode; Julia Frese; Stefan Jockenhoevel; Petra Mela
Journal:  Tissue Eng Part C Methods       Date:  2014-03-25       Impact factor: 3.056

Review 2.  Mechanical considerations for polymeric heart valve development: Biomechanics, materials, design and manufacturing.

Authors:  Richard L Li; Jonathan Russ; Costas Paschalides; Giovanni Ferrari; Haim Waisman; Jeffrey W Kysar; David Kalfa
Journal:  Biomaterials       Date:  2019-09-17       Impact factor: 12.479

3.  Hemocompatibility and Hemodynamics of Novel Hyaluronan-Polyethylene Materials for Flexible Heart Valve Leaflets.

Authors:  David A Prawel; Harold Dean; Marcio Forleo; Nicole Lewis; Justin Gangwish; Ketul C Popat; Lakshmi Prasad Dasi; Susan P James
Journal:  Cardiovasc Eng Technol       Date:  2014-03-01       Impact factor: 2.495

4.  Computational investigation of left ventricular hemodynamics following bioprosthetic aortic and mitral valve replacement.

Authors:  Fei Xu; Emily L Johnson; Chenglong Wang; Arian Jafari; Cheng-Hau Yang; Michael S Sacks; Adarsh Krishnamurthy; Ming-Chen Hsu
Journal:  Mech Res Commun       Date:  2020-10-16       Impact factor: 2.254

Review 5.  Materials and manufacturing perspectives in engineering heart valves: a review.

Authors:  F Oveissi; S Naficy; A Lee; D S Winlaw; F Dehghani
Journal:  Mater Today Bio       Date:  2019-12-05
  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.