PCB congener distribution in estuarine water, sediment and fish samples: implications for monitoring programs.

Traditional analyses for PCBs in environmental matrices have focused on commercial Aroclor mixtures with detection limits in the 100 to 1000 part per trillion range. This approach has recently been supplanted by analyses for specific PCB compounds called congeners with detection limits less than 0.5 ppt. At the national level, total PCB determinations based upon selected PCB congeners typically characterize analyses of surface water, sediment and tissue. These federal efforts rely on a suite of 18 to 20 congeners out of a total of 209 congeners to characterize total PCB. The present study compares total PCB estimates based upon this subset of congeners with estimates based upon an expanded list of 81 congeners from water, sediment and fish tissue collected from the Delaware Estuary. Analytical data from monitoring programs conducted in the Delaware Estuary by the Delaware River Basin Commission, NOAA National Ocean Service, U.S. Army Corps of Engineers and the U.S. Environmental Protection Agency from 1996 to 1998 were evaluated. Total PCB estimates derived from the different sets of congeners, including the adjustment factor of 2.0 used by NOAA, were compared. This evaluation indicated that differences exist between total PCB determinations based upon these approaches, and that these differences vary depending on the matrix analyzed. The bias associated with using a smaller set of PCB congeners, and the implications for risk assessment are discussed.