Apparent solubility of drugs in partially crystalline systems.

Using several griseofulvin samples, representing different solid-state structures, the solubility behavior of drugs in both one-state (totally ordered, semiordered or disordered) and two-state systems was studied. Special attention was directed towards the surface structure of the particles. The partially crystalline samples were obtained by milling the raw material (crystalline standard) or storing the quenched sample (amorphous standard). The solid-state structure of the materials was studied using x-ray diffraction (XRD), differential scanning calorimetry (DSC), isothermal microcalorimetry (IMC), and scanning electron microscopy (SEM). The saturation concentration of the materials was studied in suspensions containing different dispersion concentrations of drug after centrifugation and filtration, using spectrophotometry. In all cases these dispersion concentrations exceeded the solubility of the drug. The solubilities were plotted vs. dispersion concentrations for each sample. Several solubility plateaus were found. The lowest and highest solubility plateaus corresponded to the solubilities of crystalline and amorphous standards. These plateaus were reached at 8 and 44 microg/mL for crystalline and amorphous griseofulvin standards, respectively. An intermediate plateau served as an indication of the existence of a totally semiordered structure. This was reached at 19 microg/mL for griseofulvin. Any deviation from these plateaus was suggested to be indicative of the existence of heterogeneity on the surface structure, which in most cases could be described as a two state system. In such cases, the apparent solubility was a function of dispersion concentration, until at very high dispersion concentrations (4000-20,000 microg/mL) the saturation concentration of the totally disordered (44 microg/mL) or semiordered (19 microg/mL) one-state phase was reached. No reduction in these values was observed during storage for 50 days. It is thus concluded that, in partially crystalline systems, the saturation concentration is an interfacial phenomenon, which depends on the amount, reactivity, and solid-state structure of the exposed solid surfaces in equilibrium with the solution. A simplified solubility model is proposed to qualitatively describe the relationship between established apparent solubilities (saturation concentrations) and different combinations of solid-state structures.