Mixed aggregate-based acid-induced cloud-point extraction and ion-trap liquid chromatography-mass spectrometry for the determination of cationic surfactants in sewage sludge.

Alkyl ammonium surfactants were extracted and concentrated from sludge samples using the acid-induced cloud-point extraction (ACPE) technique. Reversed-phase liquid chromatography-electrospray ionization in positive ion mode ion-trap mass spectrometry was then used for the separation, quantitation and identification of single homologues of the cationic surfactants. Variables affecting the ACPE efficiency were optimized using a spiked activated sludge. Total method recoveries ranged from 91 to nearly 100%. Detection limits for cationics in the sludge were between 40 and 75 ng/g. The analysis of cationic surfactants in activated and dehydrated sludge collected from two different sewage treatment plants revealed the presence of dialkyldimethyl, alkylbenzyldimethyl and alkyltrimethyl ammonium in the concentration range from 0.1 to 34 mg/kg. Alkylpyridinium surfactants were not detected. The persistence of alkyl ammonium surfactants in sewage sludge after treatments applied at municipal sewage plants was confirmed.