NMR properties of petroleum reservoir fluids.

NMR well logging of petroleum reservoir require the measurement of the NMR response of water, oil, and gas in the pore space of rocks at elevated temperatures and pressures. The viscosity of the oil may range from less than 1 cp to greater than 10,000 cp. Also, the oil and gas are not a single component but rather a broad distribution of components. The log mean T1 and T2 relaxation time of dead (gas free) crude oils are correlated with viscosity/temperature and Larmor frequency. The relaxation time of live oils deviate from the correlation for dead crude oils. This deviation can be correlated with the methane content of the oil. Natural gas in the reservoir has components other than methane. Mixing rules are developed to accommodate components such as ethane, propane, carbon dioxide, and nitrogen. Interpretation of NMR logs uses both relaxation and diffusion to distinguish the different fluids present in the formation. Crude oils have a broad spectrum of components but the relaxation time distribution and diffusion coefficient distribution are correlated. This correlation is used to distinguish crude oil from the response of water in the pores of the rock. This correlation can also be used to estimate viscosity of the crude oil.