Adhesion measurements on the attachment devices of the jumping spider Evarcha arcuata.

The feet of the jumping spider Evarcha arcuata attach to rough substrates using tarsal claws. On smooth surfaces, however, attachment is achieved by means of a claw tuft, the scopula. All eight feet bear a tarsal scopula, which is equipped with setae, these again being covered by numerous setules. In E. arcuata, an estimated 624,000 setules, with a mean contact area of 1.7 x 10(5) nm(2), are present. The spider's entire contact area thus totals 1.06 x 10(11) nm(2). Adhesion to the substrate does not depend on the secretion of an adhesive fluid. Analysis via atomic force microscopy (AFM) shows that a single setule can produce an adhesive force (F(a)) of 38.12 nN perpendicular to a surface. Consequently, at a total F(a) of 2.38 x 10(-2) N and a mean body mass of 15.1 mg, a safety factor (SF; F(a)/F(m), where F(m) is weight) of 160 is achieved. Tenacity (tau(n); F(a)/A, where A is area of contact) amounts to 2.24 x 10(5) N m(-2).