Literature DB >> 12815355

A reliable method for securing anterior denture teeth in denture bases.

Gabriel R Zuckerman1.   

Abstract

STATEMENT OF PROBLEM: Bond failures continue to occur between resin denture teeth and the denture base.
PURPOSE: This qualitative study examined a denture tooth modification to determine whether the joint produced between the denture tooth and the denture base resin was stronger than the materials from which it was composed.
MATERIAL AND METHODS: Modified and unmodified resin denture teeth were processed to a denture base and stressed until fracture occurred. The fragments were saved, labeled, examined, and evaluated.
RESULTS: The unmodified resin denture teeth, which were displaced from the denture, exhibited no evidence of a bond to the denture base. The modified resin denture teeth fractured before separation could occur.
CONCLUSION: Within the limitations of this study, the cingulum ledge lock modification produced a mechanical union of the resin denture teeth tested to the denture base material tested that was stronger than the materials from which the lock was composed.

Entities:  

Mesh:

Substances:

Year:  2003        PMID: 12815355     DOI: 10.1016/s0022-3913(02)52713-x

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN: 0022-3913            Impact factor:   3.426


  6 in total

1.  Bond of acrylic teeth to different denture base resins after various surface-conditioning methods.

Authors:  Reinhold Lang; Carola Kolbeck; Rainer Bergmann; Gerhard Handel; Martin Rosentritt
Journal:  Clin Oral Investig       Date:  2010-12-22       Impact factor: 3.573

2.  Influence of Surface Modifications of Acrylic Resin Teeth on Shear Bond Strength with Denture Base Resin-An Invitro Study.

Authors:  Vallabh Mahadevan; Madhusudan Krishnan; Chitra Shankar Krishnan; N S Azhagarasan; Jayakrishnakumar Sampathkumar; Hariharan Ramasubramanian
Journal:  J Clin Diagn Res       Date:  2015-09-01

3.  The effect of different chemical surface treatments of denture teeth on shear bond strength: a comparative study.

Authors:  Gauravi Jain; Umesh Palekar; Vaibav Awinashe; Sunil Kumar Mishra; Abhishek Kawadkar; Tripti Rahangdale
Journal:  J Clin Diagn Res       Date:  2014-06-20

4.  The bond between acrylic resin denture teeth and the denture base: recommendations for best practice.

Authors:  D R Radford; A S Juszczyk; R K F Clark
Journal:  Br Dent J       Date:  2014-02       Impact factor: 1.626

5.  Comparative failure load values of acrylic resin denture teeth bonded to three different heat cure denture base resins: An in vitro study.

Authors:  Sumit Singh Phukela; Amit Dua; Mahima Dua; Varun Sehgal; Gaurav Setya; Rupinder Singh Dhall
Journal:  J Int Soc Prev Community Dent       Date:  2016-04

6.  Effect of Different Surface Modifications of Acrylic Teeth and Thermocycling on Shear Bond Strength to Polycarbonate Denture Base Material.

Authors:  Humam M Al-Somaiday; Aula Kamal Rafeeq; Manar E Al-Samaray
Journal:  Int J Biomater       Date:  2022-02-08
  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.