Literature DB >> 12809783

Thermal and photochemical nitric oxide release from S-nitrosothiols incorporated in Pluronic F127 gel: potential uses for local and controlled nitric oxide release.

Sílvia Mika Shishido1, Amedea Barozzi Seabra, Watson Loh, Marcelo Ganzarolli de Oliveira.   

Abstract

The local delivery of nitric oxide (nitrogen monoxide, NO) by thermal or photochemical means to target cells or organs has a great potential in several biomedical applications, especially if the NO donors are incorporated into non-toxic viscous matrices. In this work, we have shown that the NO donors S-nitrosoglutathione (GSNO) and S-nitroso-N-acetylcysteine (SNAC) can be incorporated into F127 hydrogels, from where NO can be released thermally or photochemically (with lambda(irr)>480nm). High sensitivity differential scanning calorimetry (HSDSC) and a new spectrophotometric method, were used to characterize the micellization and the reversal thermal gelation processes of the F127 hydrogels containing NO donors, and to modulate the gelation temperatures to the range 29-32 degrees C. Spectral monitoring of the S-NO bond cleavage showed that the initial rates of thermal and photochemical NO release (ranging from 2 to 45 micromoll(-1)min(-1)) are decreased in the hydrogel matrices, relative to those obtained in aqueous solutions. This stabilization effect was assigned to a cage recombination mechanism and offers an additional advantage for the storage and handling of S-nitrosothiols. These results indicate that F127 hydrogels might be used for the thermal and photochemical delivery of NO from S-nitrosothiols to target areas in biomedical applications.

Entities:  

Mesh:

Substances:

Year:  2003        PMID: 12809783     DOI: 10.1016/s0142-9612(03)00153-4

Source DB:  PubMed          Journal:  Biomaterials        ISSN: 0142-9612            Impact factor:   12.479


  24 in total

1.  S-nitrosothiol tethered polymer hexagons: synthesis, characterisation and antibacterial effect.

Authors:  S Priya; R Nithya; Sheela Berchmans
Journal:  J Mater Sci Mater Med       Date:  2013-08-31       Impact factor: 3.896

2.  Extended Nitric Oxide-Releasing Polyurethanes via S-Nitrosothiol-Modified Mesoporous Silica Nanoparticles.

Authors:  Maggie J Malone-Povolny; Mark H Schoenfisch
Journal:  ACS Appl Mater Interfaces       Date:  2019-03-19       Impact factor: 9.229

3.  Improved Hemocompatibility of Multilumen Catheters via Nitric Oxide (NO) Release from S-Nitroso-N-acetylpenicillamine (SNAP) Composite Filled Lumen.

Authors:  Elizabeth J Brisbois; Maria Kim; Xuewei Wang; Azmath Mohammed; Terry C Major; Jianfeng Wu; Jessica Brownstein; Chuanwu Xi; Hitesh Handa; Robert H Bartlett; Mark E Meyerhoff
Journal:  ACS Appl Mater Interfaces       Date:  2016-10-21       Impact factor: 9.229

4.  Characterization of an S-nitroso-N-acetylpenicillamine-based nitric oxide releasing polymer from a translational perspective.

Authors:  Marcus J Goudie; Elizabeth J Brisbois; Jitendra Pant; Alex Thompson; Joseph A Potkay; Hitesh Handa
Journal:  Int J Polym Mater       Date:  2016-06-15       Impact factor: 2.604

5.  Effect of corticosteroids and lung ventilation in the VEGF and NO pathways in congenital diaphragmatic hernia in rats.

Authors:  Frances Lilian Lanhellas Gonçalves; Rebeca Lopes Figueira; Ana Leda Bertoncini Simões; Rodrigo Melo Gallindo; Allan Coleman; José Luis Peiró; Lourenço Sbragia
Journal:  Pediatr Surg Int       Date:  2014-10-15       Impact factor: 1.827

6.  Nitric oxide (NO)-induced death of gram-negative bacteria from a light-controlled NO-releasing platform.

Authors:  Genevieve M Halpenny; Brandon Heilman; Pradip K Mascharak
Journal:  Chem Biodivers       Date:  2012-09       Impact factor: 2.408

7.  Design Considerations for Silica-Particle-Doped Nitric-Oxide-Releasing Polyurethane Glucose Biosensor Membranes.

Authors:  Robert J Soto; Jonathon B Schofield; Shaylyn E Walter; Maggie J Malone-Povolny; Mark H Schoenfisch
Journal:  ACS Sens       Date:  2016-12-15       Impact factor: 7.711

Review 8.  Nitric Oxide Therapy for Diabetic Wound Healing.

Authors:  Maggie J Malone-Povolny; Sara E Maloney; Mark H Schoenfisch
Journal:  Adv Healthc Mater       Date:  2019-01-15       Impact factor: 9.933

Review 9.  Nitric oxide-releasing/generating polymers for the development of implantable chemical sensors with enhanced biocompatibility.

Authors:  Yiduo Wu; Mark E Meyerhoff
Journal:  Talanta       Date:  2007-06-28       Impact factor: 6.057

10.  Long-term nitric oxide release and elevated temperature stability with S-nitroso-N-acetylpenicillamine (SNAP)-doped Elast-eon E2As polymer.

Authors:  Elizabeth J Brisbois; Hitesh Handa; Terry C Major; Robert H Bartlett; Mark E Meyerhoff
Journal:  Biomaterials       Date:  2013-06-15       Impact factor: 12.479

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.