Biofiltration of a mixture of volatile organic compounds on granular activated carbon.

The performance of a biofilter packed with Active Carbon (AC) was evaluated. The effluent (alcohol, ketones, esters, aromatic and chlorinated compounds) treated was a representative mixture of most common industrial emissions. To achieve a better knowledge of multicomponent adsorption mechanisms, and to underline the interest of inoculating AC, a control abiotic humidified filter had been operated in the same conditions as the biofilter. For a load of 110 g VOC m(-3) AC h(-1), after 55 days of operation, the removal efficiency was higher in the biotic than in the abiotic filter (85% vs 55%, respectively). Moreover, in the biofilter, at steady state, the elimination of all compounds was almost complete except for chlorinated compounds and p-xylene (removal efficiency of 25% and 64%, respectively). The microbial colonization of AC involved a decrease of the adsorption sites accessibility and enhanced the treatment of VOCs (volatile organic compounds) having a lower affinity for activated carbon. Moreover, while aromatic compounds and MIBK were eliminated along the overall height of the biofilter, pollutants with reduced affinity for AC, such as methanol, acetone, and halogenated compounds were only treated on the second half of the reactor. Thus, the affinity for activated carbon was an important parameter controlling the biodegradation process. Nevertheless, the use of AC as packing material in biofilters treating complex mixtures of VOCs is limited. Actually, similar removal efficiency could be reached, in the same conditions, for a biofilter packed with granular peat. Furthermore, for the biofilter packed with AC, the column height necessary to remove biodegradable compounds, with reduced affinity for the support, was important. Copyright 2003 Wiley Periodicals, Inc. Biotechnol Bioeng 83: 479-488, 2003.