Comparison of the compression characteristics between new one-step dry-coated tablets (OSDRC) and dry-coated tablets (DC).

One-step dry-coated tablets (OSDRC) were prepared using materials which are generally used in pharmaceutical tablets. The radial tensile strength of OSDRC was measured for various compression pressures and core porosities before the final compression to compare with that of conventional dry-coated tablets (DC). Furthermore, stress relaxation in the compression process was investigated. Radial tensile strength and stress relaxation profiles of OSDRC were the same as those of conventional DC. X-ray computerized tomography (CT) of the tablets showed that the density distribution of both tablets was also the same. Thus, we concluded that OSDRC and conventional DC have the same compression characteristics and physical properties. The OSDRC-system was executed by the use of upper and lower punches, which had a double structure, a center punch, and an outer punch surrounding the center punch. The OSDRC process consists of three compressions to make the lower-outer layer (1st-outer layer), the core, and the whole tablet including the upper-outer and side-outer layers (2nd-outer layer). At first, the powder for the 1st-outer layer fills a space, which is made by the lower-center punch and lower-outer punch, and is pre-compressed by the upper-center punch. Then, while the upper-center punch pushes the pre-compressed 1st-outer layer, the lower-center punch is slid down. The upper-center punch is then pulled away to make a space, which is filled with the powder for the core. This is then pre-compressed by the upper-center punch. Finally, the lower-outer punch is slid downward and the powder for the 2nd-outer layer fills and surrounds the pre-compressed core/1st-outer layer completely. The core/1st-outer layer and the 2nd-outer layer complex is then compressed by the upper and lower punches in which the center punches are unified with the outer punches, respectively. This system can be assembled onto the turn table of a rotary tableting machine, and can make a dry-coated tablet in a single turn.