Reaction of arsenic vapor species with fly ash compounds: kinetics and speciation of the reaction with calcium silicates.

In coal combustion systems, the partitioning of arsenic between the vapor and solid phases is determined by the interaction of arsenic vapors with fly ash compounds under post-combustion conditions. This partitioning is affected by gas-solid reactions between the calcium components of the ash particles and arsenic vapors. In this study, bench scale experiments were conducted with calcium compounds typical of coal-derived fly ash to determine product formation, the extent of reaction and reaction rates when contacted by arsenic oxide vapors. Experiments conducted with arsenic trioxide (As(4)O(6(g))) vapors in contact with calcium oxide, di-calcium silicate and mono-calcium silicate over the temperature range 600-1000 degrees C indicated that these solids were capable of reacting with arsenic vapor species in both air and nitrogen. Calcium arsenate was the observed reaction product in all the samples analyzed. Maximum capture of arsenic occurred at 1000 degrees C with calcium oxide being the most effective of the three solids over the range of temperatures studied. Using a shrinking core model for a first order reaction and the results from intrinsic kinetic experiments conducted in air, the reaction rate constants were found to be 1.4 x 10(-3)exp(-2776/T) m/s for calcium oxide particles, 7.2 x 10(-3)exp(-3367/T) m/s for di-calcium silicate particles and 5.5 x 10(-3)exp(-3607/T) m/s for mono-calcium silicate particles. These results therefore suggest that any calcium present in fly ash can react with arsenic vapor and capture the metal in water-insoluble forms of the less hazardous As(V) oxidation state.