Rapid and sensitive high-performance liquid chromatographic determination of four cephalosporin antibiotics in pharmaceuticals and body fluids.

A rapid, accurate and sensitive method has been developed and validated for the quantitative simultaneous determination of four cephalosporins, cephalexin and cefadroxil (first-generation), cefaclor (second-generation) and cefataxim (third-generation), in pharmaceuticals as well as in human blood serum and urine. A Spherisorb ODS-2 250 x 4-mm, 5-microm analytical column was used with an eluting system consisting of a mixture of acetate buffer (pH 4.0)-CH(3)OH 78-22% (v/v) at a flow-rate 1.2 ml/min. Detection was performed with a variable wavelength UV-Vis detector at 265 nm resulting in limit of detection of 0.2 ng for cefadroxil and cephalexin, but only 0.1 ng for cefotaxime and cefaclor per 20-microl injection. Hydrochlorothiazide (HCT) (6-chloro-3,4-dihydro-7 sulfanyl-2H-1,2,4-benzothiadiazine-1-1-dioxide) was used as internal standard at a concentration of 2 ng/microl. A rectilinear relationship was observed up to 8, 5, 12 and 35 ng/microl for cefadroxil, cefotaxime, cefaclor, cephalexin, respectively. Analysis time was less than 7 min. The statistical evaluation of the method was examined by means of within-day repeatability (n=8) and day-to-day precision (n=9) and was found to be satisfactory with high accuracy and precision. The method was applied to the determination of the cephalosporins in commercial pharmaceuticals and in biological fluids: human blood serum after solid-phase extraction and urine simply after filtration and dilution. Recovery of analytes in spiked samples was in the range from 76.3 to 112.0%, over the range of 1-8 ng/microl.