Literature DB >> 12639835

Exposure assessment to alpha- and beta-pinene, delta(3)-carene and wood dust in industrial production of wood pellets.

K Edman1, H Lofstedt, P Berg, K Eriksson, S Axelsson, I Bryngelsson, C Fedeli.   

Abstract

The main aim of the study was to measure the exposure to monoterpenes (alpha- and beta-pinene and Delta(3)-carene) and wood dust during industrial production of wood pellets and briquettes. Additional aims were to compare the results from wood dust sampled on a filter with real time measurements using a direct reading instrument and to identify peak exposures to dust. Twenty-four men working at six companies involved in industrial production of wood pellets and briquettes participated in the study. Monoterpenes were measured by diffusive sampling and wood dust was measured as total dust. A data logger (DataRAM) was used for continuous monitoring of dust concentration for 18 of the participants. The sampling time was approximately 8 h. The personal exposure to monoterpenes ranged from 0.64 to 28 mg/m(3) and a statistically significant (Kruskal-Wallis test, P = 0.0002) difference in levels of monoterpenes for workers at different companies was seen. In the companies the personal exposure to wood dust varied between 0.16 and 19 mg/m(3) and for 10 participants the levels exceeded the present Swedish occupational exposure limit (OEL) of 2 mg/m(3). The levels of wood dust during the morning shift were significantly (Mann-Whitney test, P = 0.04) higher compared with the afternoon shift. Continuous registration of dust concentration showed peak values for several working operations, especially cleaning of truck engines with compressed air. For 24 workers in six companies involved in industrial production of wood pellets the personal exposure to monoterpenes was low and to wood dust high compared with the present Swedish OEL and previous studies in Swedish wood industries. Since the DataRAM can identify critical working tasks with high wood dust exposure a reduction in exposure levels could probably be achieved by changes in working routines and by the use of protective equipment.

Entities:  

Mesh:

Substances:

Year:  2003        PMID: 12639835     DOI: 10.1093/annhyg/meg024

Source DB:  PubMed          Journal:  Ann Occup Hyg        ISSN: 0003-4878


  5 in total

Review 1.  Potential Occupational Exposures and Health Risks Associated with Biomass-Based Power Generation.

Authors:  Annette C Rohr; Sharan L Campleman; Christopher M Long; Michael K Peterson; Susan Weatherstone; Will Quick; Ari Lewis
Journal:  Int J Environ Res Public Health       Date:  2015-07-22       Impact factor: 3.390

2.  Respiratory symptoms and lung function in relation to wood dust and monoterpene exposure in the wood pellet industry.

Authors:  Håkan Löfstedt; Katja Hagström; Ing-Liss Bryngelsson; Mats Holmström; Anna Rask-Andersen
Journal:  Ups J Med Sci       Date:  2017-03-01       Impact factor: 2.384

Review 3.  Peak Inhalation Exposure Metrics Used in Occupational Epidemiologic and Exposure Studies.

Authors:  M Abbas Virji; Laura Kurth
Journal:  Front Public Health       Date:  2021-01-08

4.  Relationship between respiratory tract complaints, functional status, and smoking in hairdressers, auto painters, and carpenters.

Authors:  Ümran Toru; Peri Meram Arbak; Kezban Özmen Süner; Özlem Yavuz; Naciye Karataş
Journal:  ScientificWorldJournal       Date:  2014-07-03

5.  Occupational Exposure to Cobalt and Tungsten in the Swedish Hard Metal Industry: Air Concentrations of Particle Mass, Number, and Surface Area.

Authors:  Maria Klasson; Ing-Liss Bryngelsson; Carin Pettersson; Bente Husby; Helena Arvidsson; Håkan Westberg
Journal:  Ann Occup Hyg       Date:  2016-05-03
  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.