Disposal of MSWI fly ash through a combined washing-immobilisation process.

The objective of this work was to investigate the feasibility of a combined washing-immobilisation process as a means of optimising the disposal of fly ash resulting from municipal solid waste incineration (MSWI) in cementitious matrices. Two different types of Italian MSWI fly ash and an ordinary Portland cement (ASTM Type I) were used. Washing pre-treatment of fly ash with water always produces a wastewater that can be successfully treated by reducing the pH to values of 6.5-7.5. This treatment is capable of removing the detected contaminants (Al, Cd, Pb, Zn) through two different mechanisms: precipitation of aluminium hydroxide and adsorption of cadmium, lead and zinc ions onto floc particles of Al(OH)(3). Setting and leaching tests on cementitious mixes prove that the hazardous sludge produced from wastewater treatment can be completely mixed with washed fly ash and this mixture can be incorporated into cementitious matrices to a great extent (75 wt.% of total solid) without the risks of an unacceptable delay of cement setting and an excessive heavy metals leachability from solidified products. The better performance of the combined washing-immobilisation process as compared to the immobilisation process of unwashed fly ash may be ascribed primarily to the ability of the washing step in promoting the formation of hydrate phases that incorporate and/or convert heavy metal compounds into less reactive forms and, secondarily, to its ability of removing significant amounts of alkali chlorides and sulphates from fly ash. As a result, MSWI fly ash is transformed into a material that adversely affects cement hydration to a much lower extent than unwashed fly ash. Copyright 2003 Elsevier Science B.V.