Literature DB >> 12616054

Anatomic study of the axis for surgical planning of transarticular screw fixation.

Tamaki Igarashi1, Shinichi Kikuchi, Katsuhiko Sato, Satoru Kayama, Koji Otani.   

Abstract

Transarticular screw fixation has shown increased stability compared with other posterior stabilization techniques. However, there have been few reports on vertebral artery injury related to the screw insertion. The current study measured the parameters of the pedicle and vertebral artery groove of the axis and clarified the accuracy and safety of the transarticular screw fixation. Direct measurements were taken from 98 dry axis vertebrae. The width and height of the pedicle were measured. The mediolateral and anteroposterior dimensions of the vertebral artery groove also were measured. Forty-one percent had asymmetry. In 20% of the specimens, the pedicle was smaller than the diameter of the screw (3.5 mm). The pedicle of the axis has large anatomic variability and asymmetry. Some pedicles were not suitable for atlantoaxial transarticular screw fixation. The risks associated with screw fixation should be prevented by preoperative computed tomography with three-dimensional reconstruction. Screw trajectory reconstruction with coronal and sagittal reconstruction is useful to evaluate the pedicle width and height.

Entities:  

Mesh:

Year:  2003        PMID: 12616054     DOI: 10.1097/00003086-200303000-00020

Source DB:  PubMed          Journal:  Clin Orthop Relat Res        ISSN: 0009-921X            Impact factor:   4.176


  20 in total

1.  Clinical application of C2 laminar screw technique.

Authors:  Weihu Ma; Leling Feng; Rongming Xu; Xiaochen Liu; Alan H Lee; Shaohua Sun; Liujun Zhao; Yong Hu; Guanyi Liu
Journal:  Eur Spine J       Date:  2010-06-05       Impact factor: 3.134

2.  Anterior retropharyngeal fixation C1-2 for stabilization of atlantoaxial instabilities: study of feasibility, technical description and preliminary results.

Authors:  Heiko Koller; Volker Kammermeier; Dietmar Ulbricht; Allan Assuncao; Stefan Karolus; Boris van den Berg; Ulrich Holz
Journal:  Eur Spine J       Date:  2006-04-08       Impact factor: 3.134

3.  Morphometric trajectory analysis for the C2 crossing laminar screw technique.

Authors:  Bin Yue; Dai-Soon Kwak; Moon-Kyu Kim; Seong-Oh Kwon; Seung-Ho Han
Journal:  Eur Spine J       Date:  2010-02-21       Impact factor: 3.134

4.  Computed tomography-based classification of axis vertebra: choice of screw placement.

Authors:  Nupur Pruthi; Rose Dawn; Yogitha Ravindranath; Tanmoy Kumar Maiti; Roopa Ravindranath; Mariamma Philip
Journal:  Eur Spine J       Date:  2014-02-23       Impact factor: 3.134

5.  CT analysis of the axis for transarticular screw fixation of rheumatoid atlantoaxial instability.

Authors:  Sung Soo Chung; Chong Suh Lee; Hye Won Chung; Chang Seok Kang
Journal:  Skeletal Radiol       Date:  2006-06-27       Impact factor: 2.199

Review 6.  Cervical screw placement using rapid prototyping drill templates for navigation: a literature review.

Authors:  Teng Lu; Chao Liu; Jun Dong; Meng Lu; Haopeng Li; Xijing He
Journal:  Int J Comput Assist Radiol Surg       Date:  2016-05-09       Impact factor: 2.924

7.  Evaluation of vertebral artery anomaly in basilar invagination and prevention of vascular injury during surgical intervention: CTA features and analysis.

Authors:  Shuaishuai Xu; Shidong Ruan; Xiaoyu Song; Jinyu Yu; Jianrong Xu; Ruozhen Gong
Journal:  Eur Spine J       Date:  2017-12-29       Impact factor: 3.134

8.  Translaminar screws of the axis--an alternative technique for rigid screw fixation in upper cervical spine instability.

Authors:  D Meyer; F Meyer; Th Kretschmer; W Börm
Journal:  Neurosurg Rev       Date:  2011-11-17       Impact factor: 3.042

9.  Vertebral artery and osseous anomalies characteristic at the craniocervical junction diagnosed by CT and 3D CT angiography in normal Czech population: analysis of 511 consecutive patients.

Authors:  P Vaněk; Ondřej Bradáč; P de Lacy; R Konopková; J Lacman; V Beneš
Journal:  Neurosurg Rev       Date:  2016-09-13       Impact factor: 3.042

10.  A novel computer-assisted drill guide template for placement of C2 laminar screws.

Authors:  Sheng Lu; Yong Q Xu; Yuan Z Zhang; Le Xie; Hai Guo; Dong P Li
Journal:  Eur Spine J       Date:  2009-06-11       Impact factor: 3.134

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.